NefMoto > Technical > NefMoto Software > Recommended USB VAG KKL Cables
Pages: 1 ... 7 8 [9] 10 11
« previous next »
Author Topic: Recommended USB VAG KKL Cables  (Read 421751 times)
SUPREME
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #120 on: June 20, 2017, 04:05:17 PM »
Just received my cable in the mail today, verified 232RL FTDI chip.

http://www.ebay.com/itm/FTDI-FT232RL-VAG-COM-KKL-409-1-OBD2-K-LINE-ISO9141-USB-FOR-VW-AUDI-SKODA-SEAT/141651292396?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Logged
MK4 AEB GTI
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425
« Reply #121 on: August 14, 2017, 07:52:15 AM »
Can I use one of these cabels?

VAG 12.12  FTDI FT232RL




CAN COMMANDER 1.4 FTDI FT232RQ
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #122 on: April 24, 2018, 12:12:14 PM »
Hello, can anyone link a cable that works with nefmoto? Tried 3 different 232rl cables, that work with vcds but not with nefmoto sw. TIA.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
rogerius
Full Member
***

Karma: +62/-6
Offline Offline

Posts: 116
« Reply #123 on: April 24, 2018, 11:37:17 PM »
Quote from: professor on April 24, 2018, 12:12:14 PM
Hello, can anyone link a cable that works with nefmoto? Tried 3 different 232rl cables, that work with vcds but not with nefmoto sw. TIA.
https://www.ebay.co.uk/itm/VAG-KKL-USB-COM-OBD-2-Diagnostic-Cable-for-AUDI-VW-Skoda-Seat-OBDII-EOBD-FT232RL-/301284625052?hash=item4625f68a9c
working well
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #124 on: April 25, 2018, 02:21:18 AM »
Quote from: rogerius on April 24, 2018, 11:37:17 PM
https://www.ebay.co.uk/itm/VAG-KKL-USB-COM-OBD-2-Diagnostic-Cable-for-AUDI-VW-Skoda-Seat-OBDII-EOBD-FT232RL-/301284625052?hash=item4625f68a9c
working well
Just to clarify, this is working well with nefmoto flashing sw for you?
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
rogerius
Full Member
***

Karma: +62/-6
Offline Offline

Posts: 116
« Reply #125 on: April 25, 2018, 06:17:17 AM »
Quote from: professor on April 25, 2018, 02:21:18 AM
Just to clarify, this is working well with nefmoto flashing sw for you?
Nefmoto and Me7Logger, both i use with this cable. Reading, writing and logging. Yes, I confirm.
Unfortunately it takes it's time, approx 13.5 min to write as my requests for Premium Licence were in vain. :-). That would have been a mere 27s ?!
MPPS v.12 takes only 2.2min to write, at a similar price.
Do you want a link for that, too?
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #126 on: April 25, 2018, 12:48:54 PM »
Quote from: rogerius on April 25, 2018, 06:17:17 AM
Nefmoto and Me7Logger, both i use with this cable. Reading, writing and logging. Yes, I confirm.
Unfortunately it takes it's time, approx 13.5 min to write as my requests for Premium Licence were in vain. :-). That would have been a mere 27s ?!
MPPS v.12 takes only 2.2min to write, at a similar price.
Do you want a link for that, too?
Yes and thank you.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
rogerius
Full Member
***

Karma: +62/-6
Offline Offline

Posts: 116
« Reply #127 on: April 25, 2018, 09:40:28 PM »
Quote from: professor on April 25, 2018, 12:48:54 PM
Yes and thank you.
https://www.ebay.co.uk/itm/MPPS-V13-Chip-Tuning-VAG-OBD2-Car-ECU-Program-Diagnostic-Cable-Scanner-Tool/331206046561?epid=928322701&hash=item4d1d6b3361:g:mQwAAOSwMEBar90F
Logged
Nobilia7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #128 on: May 13, 2019, 02:04:44 AM »
Hello Tony,
I have a blue USB cable, labeled KKL409.1, FTDI 232BM chip. When I launch Nefmoto and hover the mouse over the device, it shows:

Type: FT_DEVICE_BM
ChipID: Not supported by this device

Just want to confirm my cable will work properly before attempting to flash my ECU (2000 GOLF-4 with EDC15VM+).
Thanks.
Logged
Mercy
Risky
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 107
« Reply #129 on: May 13, 2019, 08:10:50 AM »
Unfortunately, that cable won't work with edc. Only me7 ecus.
Logged
Nobilia7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #130 on: May 13, 2019, 01:10:58 PM »
Will this cable not work, or will the program not work with EDC15? Thanks.
Logged
Mercy
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #131 on: May 13, 2019, 06:45:24 PM »
Quote from: Nobilia7 on May 13, 2019, 01:10:58 PM
Will this cable not work, or will the program not work with EDC15? Thanks.

The NefMoto flasher ONLY works with ME7
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Nobilia7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #132 on: May 14, 2019, 01:22:17 AM »
many thanks.
Logged
Mercy
GolfSportWagen
Full Member
***

Karma: +10/-10
Offline Offline

Posts: 100
« Reply #133 on: October 10, 2019, 01:44:08 PM »
Has anyone found a Galletto cable with a proper digitally signed driver for use with Win 10?
Logged
GolfSportWagen
Full Member
***

Karma: +10/-10
Offline Offline

Posts: 100
« Reply #134 on: October 11, 2019, 03:00:58 PM »
Is the only difference between a basic KKL cable and a Galletto cable the fact that the Galletto cable can be used in boot mode to recover a bricked ECU?
Logged
Pages: 1 ... 7 8 [9] 10 11
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 12:30:48 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 18 queries. (Pretty URLs adds 0s, 0q)