Pages: 1 ... 7 8 [9]
Author Topic: Recommended USB VAG KKL Cables  (Read 160797 times)
SUPREME
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14



« Reply #120 on: June 20, 2017, 04:05:17 PM »

Just received my cable in the mail today, verified 232RL FTDI chip.

http://www.ebay.com/itm/FTDI-FT232RL-VAG-COM-KKL-409-1-OBD2-K-LINE-ISO9141-USB-FOR-VW-AUDI-SKODA-SEAT/141651292396?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Logged

BlackT
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 188



« Reply #121 on: August 14, 2017, 07:52:15 AM »

Can I use one of these cabels?

VAG 12.12  FTDI FT232RL




CAN COMMANDER 1.4 FTDI FT232RQ


Logged
professor
Sr. Member
****

Karma: +23/-0
Offline Offline

Posts: 408



« Reply #122 on: April 24, 2018, 12:12:14 PM »

Hello, can anyone link a cable that works with nefmoto? Tried 3 different 232rl cables, that work with vcds but not with nefmoto sw. TIA.
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
rogerius
Full Member
***

Karma: +26/-6
Offline Offline

Posts: 54


« Reply #123 on: April 24, 2018, 11:37:17 PM »

Hello, can anyone link a cable that works with nefmoto? Tried 3 different 232rl cables, that work with vcds but not with nefmoto sw. TIA.
https://www.ebay.co.uk/itm/VAG-KKL-USB-COM-OBD-2-Diagnostic-Cable-for-AUDI-VW-Skoda-Seat-OBDII-EOBD-FT232RL-/301284625052?hash=item4625f68a9c
working well
Logged
professor
Sr. Member
****

Karma: +23/-0
Offline Offline

Posts: 408



« Reply #124 on: April 25, 2018, 02:21:18 AM »

Just to clarify, this is working well with nefmoto flashing sw for you?
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
rogerius
Full Member
***

Karma: +26/-6
Offline Offline

Posts: 54


« Reply #125 on: April 25, 2018, 06:17:17 AM »

Just to clarify, this is working well with nefmoto flashing sw for you?
Nefmoto and Me7Logger, both i use with this cable. Reading, writing and logging. Yes, I confirm.
Unfortunately it takes it's time, approx 13.5 min to write as my requests for Premium Licence were in vain. :-). That would have been a mere 27s ?!
MPPS v.12 takes only 2.2min to write, at a similar price.
Do you want a link for that, too?
Logged
professor
Sr. Member
****

Karma: +23/-0
Offline Offline

Posts: 408



« Reply #126 on: April 25, 2018, 12:48:54 PM »

Nefmoto and Me7Logger, both i use with this cable. Reading, writing and logging. Yes, I confirm.
Unfortunately it takes it's time, approx 13.5 min to write as my requests for Premium Licence were in vain. :-). That would have been a mere 27s ?!
MPPS v.12 takes only 2.2min to write, at a similar price.
Do you want a link for that, too?
Yes and thank you.
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
rogerius
Full Member
***

Karma: +26/-6
Offline Offline

Posts: 54


« Reply #127 on: April 25, 2018, 09:40:28 PM »

Yes and thank you.
https://www.ebay.co.uk/itm/MPPS-V13-Chip-Tuning-VAG-OBD2-Car-ECU-Program-Diagnostic-Cable-Scanner-Tool/331206046561?epid=928322701&hash=item4d1d6b3361:g:mQwAAOSwMEBar90F
Logged
Nobilia7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #128 on: May 13, 2019, 02:04:44 AM »

Hello Tony,
I have a blue USB cable, labeled KKL409.1, FTDI 232BM chip. When I launch Nefmoto and hover the mouse over the device, it shows:

Type: FT_DEVICE_BM
ChipID: Not supported by this device

Just want to confirm my cable will work properly before attempting to flash my ECU (2000 GOLF-4 with EDC15VM+).
Thanks.
Logged

Mercy
Risky
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 92


« Reply #129 on: May 13, 2019, 08:10:50 AM »

Unfortunately, that cable won't work with edc. Only me7 ecus.
Logged
Nobilia7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #130 on: May 13, 2019, 01:10:58 PM »

Will this cable not work, or will the program not work with EDC15? Thanks.
Logged

Mercy
nyet
Administrator
Hero Member
*****

Karma: +422/-49
Offline Offline

Posts: 9386


WWW
« Reply #131 on: May 13, 2019, 06:45:24 PM »

Will this cable not work, or will the program not work with EDC15? Thanks.

The NefMoto flasher ONLY works with ME7
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Nobilia7
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #132 on: May 14, 2019, 01:22:17 AM »

many thanks.
Logged

Mercy
Pages: 1 ... 7 8 [9]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)