Pages: [1]
Author Topic: Definition Request 4B0906018AA  (Read 6702 times)
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« on: February 19, 2013, 01:17:34 PM »

Hello,

Don't suppose anyone has a definition for a 4B0906018AA (Passat 1.8t)

Cheers

Dave
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: February 20, 2013, 02:56:39 AM »

Dave,

If its a 512kb file then try the 018f file that's on here.
I looked at a 6k0906032aa Ecu yesterday me7.5 512kb and the 018f works perfectly. Plus there's a full winols on here.
Logged
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #2 on: February 20, 2013, 05:56:43 AM »

Hello Dan,

I haven't downloaded from the car yet, but the original here that I am using for building the XDF is 1meg:-

http://nefariousmotorsports.com/forum/index.php?topic=2564.0

I will have a look at the 018f.

Cheers
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #3 on: February 20, 2013, 06:02:55 AM »

Hello Dan,

I haven't downloaded from the car yet, but the original here that I am using for building the XDF is 1meg:-

http://nefariousmotorsports.com/forum/index.php?topic=2564.0

I will have a look at the 018f.

Cheers

Says its 512kb. I think the 018f will flash on or at least you can use it to cross match
Logged
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #4 on: February 21, 2013, 12:36:14 PM »

I will download the one of the car in question,

cheers
Logged
prj
Hero Member
*****

Karma: +904/-420
Offline Offline

Posts: 5790


« Reply #5 on: February 21, 2013, 05:19:18 PM »

I've tuned this ECU before.

What are you doing exactly?

Also, I wouldn't flash a transverse file from A3 (I believe) on a Longitudinal Passat.
Most likely the throttle won't work and so on, if it will even boot.

But I guarantee you will have subtle running issues with a lot of stuff.
« Last Edit: February 21, 2013, 05:21:42 PM by prj » Logged

PM's will not be answered, so don't even try.
Log your car properly.
Barks
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #6 on: February 24, 2013, 12:30:05 PM »

Hello,

I would just be using a 018f as a starter for 10 for the XDF

The car has already been mapped for a K04-001, but my friend is finding it a little too aggressive for a FWD (very all or nothing in his words), so the plan was just to make it a little more progressive and wind it back a little.

Well that was the plan, just wondered if there was a XDF kicking around to save a bit of work, Do you have you a partial?? Currently using a 4B0906018CG XDF for a baseline

Cheers

Dave
« Last Edit: February 24, 2013, 12:35:41 PM by Barks » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)