Pages: [1]
Author Topic: Reading 2001 Audi TT 225Q AMU ECU  (Read 4913 times)
Currancchs
Newbie
*

Karma: +9/-0
Offline Offline

Posts: 20


« on: February 21, 2013, 06:16:28 PM »

ECU is: 8N0 906 018T

Vehicle is a 2001 Audi TT 225 Quattro w/6 speed manual, stock ECU (tried to read spare APR stage II ECU on same car as well, but was unsuccesful)

Figured I'd contribute, if only in a small way:

Reading this ECU required me to use memory layout ME7 29F800BB and manually set the Baud rate to 10400

I originally tried to read using ME7 29F800 with the max baud rate available, didn't work and spit out some weird characters during connection. I then tried ME7 29F800BB and this spit out something like: THIS IS THE RAM during connection, but still failed to read (after clicking full read flash), got stuck at negotiating communications... When I set the Baud rate lower it worked.

Hope this helps somebody!
« Last Edit: February 21, 2013, 06:19:29 PM by Currancchs » Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: February 21, 2013, 06:22:58 PM »

that is probably a 512kb file too btw. not 1mb like you have read.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #2 on: February 21, 2013, 07:11:37 PM »

THIS-IS-THE-RAM comes up if you don't power down the ecu after a flashing/reading session.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)