Pages: [1]
Author Topic: VAG DCM3.7 Checksum  (Read 8720 times)
nano
Newbie
*

Karma: +1/-1
Offline Offline

Posts: 19


« on: December 02, 2016, 08:00:17 AM »

Hello, looking for smart guy to do a collaboration for find CKS on this new ecu. Looking also for good info Smiley
Logged
nano
Newbie
*

Karma: +1/-1
Offline Offline

Posts: 19


« Reply #1 on: December 04, 2016, 11:09:43 PM »

anyone? Sad
Logged
IamwhoIam
Hero Member
*****

Karma: +43/-99
Offline Offline

Posts: 1030


« Reply #2 on: December 06, 2016, 09:04:17 AM »

Have you figured out flashing for them?
Logged

I have no logs because I have a boost gauge (makes things easier)
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #3 on: December 06, 2016, 02:32:22 PM »

There is a Russian tool that flashes them. I have it.

They say it does checksum too, but I have not been able to test.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
IamwhoIam
Hero Member
*****

Karma: +43/-99
Offline Offline

Posts: 1030


« Reply #4 on: December 07, 2016, 01:09:55 AM »

My bad, I thought he was talking about DCM6.x from mk7 Golf 2.0 TDI. DCM3.7 is dead easy to flash, I can do it with my own tools, but I've never looked into checksums for them. They do have RSA though, so I'm not sure what can be done and how.
Logged

I have no logs because I have a boost gauge (makes things easier)
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #5 on: December 07, 2016, 05:54:24 AM »

DCM3.7 is dead easy to flash, I can do it with my own tools, but I've never looked into checksums for them.
Not aware of any publicly available major tools that do this.

RSA should not be a problem on these if they are SH70xx based.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
IamwhoIam
Hero Member
*****

Karma: +43/-99
Offline Offline

Posts: 1030


« Reply #6 on: December 07, 2016, 09:10:34 AM »

I said "my own tools", where does it say "publicly available tools"? I hardly ever use any of the publicly available tools nowadays, although I have most of them since back in the day.
Logged

I have no logs because I have a boost gauge (makes things easier)
turbojohan
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 185


« Reply #7 on: December 07, 2016, 11:20:19 AM »

There is a Russian tool that flashes them. I have it.

They say it does checksum too, but I have not been able to test.

I have it too but problems with checksum.
Only durationmap works al other changes the ecu reboots every 30 seconds...
Fgtech works should Ok they say..


Verzonden vanaf mijn iPhone met Tapatalk
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #8 on: December 07, 2016, 06:10:10 PM »

I have it too but problems with checksum.
Only durationmap works al other changes the ecu reboots every 30 seconds...
Fgtech works should Ok they say..

Are you 100% sure this is not because of your mods?
Logged

PM's will not be answered, so don't even try.
Log your car properly.
turbojohan
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 185


« Reply #9 on: December 08, 2016, 01:24:34 AM »

yes.
Tried all kinds of small mods and all same problem.
I can sent you file if you want to test something.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #10 on: December 08, 2016, 01:55:25 AM »

If you change 1 byte and then get the issue it is for sure a checksum problem.
But if you are able to flash the ECU with a modified file and actually have it boot up (exit bootloader), then I would think the software can be patched to kill checksum checks.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
turbojohan
Full Member
***

Karma: +5/-0
Offline Offline

Posts: 185


« Reply #11 on: December 08, 2016, 03:32:38 AM »

Prj, i've sent you an email.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 17 queries. (Pretty URLs adds 0s, 0q)