Andre20VT
Jr. Member
Karma: +1/-0
 Offline
Posts: 30
|
 |
« Reply #105 on: April 18, 2013, 01:05:03 PM »
|
|
|
Tested today when i made a longer ride but 2step and antilag doesn't work yet on my 032MJ ecu  I checked the clutch signal because last time the switch was defective but it was working good now. Sow i think that there is something else wrong... |
|
|
|
|
Logged
|
|
|
|
maZer.GTi
Full Member
Karma: +68/-6
Offline
Posts: 246
|
|
« Reply #106 on: April 19, 2013, 05:19:25 PM »
|
|
|
Tested today when i made a longer ride but 2step and antilag doesn't work yet on my 032MJ ecu I checked the clutch signal because last time the switch was defective but it was working good now. Sow i think that there is something else wrong... Do Logfile with me7logger with variables i posted  Upload Logfile and your original File and Modded File. Maybe someone can help you. |
|
|
|
|
Logged
|
|
|
|
Andre20VT
Jr. Member
Karma: +1/-0
Offline
Posts: 30
|
|
« Reply #107 on: April 20, 2013, 03:34:04 AM »
|
|
|
Do Logfile with me7logger with variables i posted Upload Logfile and your original File and Modded File. Maybe someone can help you. I have got a very busy weekend but i will try to make a logfile asap thanx |
|
|
|
|
Logged
|
|
|
|
pedrosousa
Full Member
Karma: +3/-0
Offline
Posts: 75
|
|
« Reply #108 on: May 01, 2013, 09:35:36 AM »
|
|
|
Andre, have you tested??
I've exactly the same issue but I don't have obd cable to log it now...
|
|
|
|
|
Logged
|
|
|
|
Andre20VT
Jr. Member
Karma: +1/-0
Offline
Posts: 30
|
|
« Reply #109 on: May 01, 2013, 02:19:50 PM »
|
|
|
Andre, have you tested??
I've exactly the same issue but I don't have obd cable to log it now...
Unfortunately not because i am very busy with my work and spend a lot of time with my child. I only checked with vagcom if i got a good working clutch and brake signal and they where fine, so something else is wrong. I also have to check how i make a log with me7logger and how i select the right channels to log because normally i make logs with vagcom. |
|
|
|
|
Logged
|
|
|
|
cactusgreens4
Full Member
Karma: +2/-0
Offline
Posts: 110
|
|
« Reply #110 on: May 03, 2013, 06:53:53 PM »
|
|
|
Can someone lend me a helping hand? I have been trying to add AL NLS to my file for some time now and I have tried the executable file and the php file both found here as well as trying to manually patch in the code into my file and nothing seems to work for me. I have tried installing php. no luck. I have tried running the executable file as well also with no luck. what is the secret here?
|
|
|
|
|
Logged
|
|
|
|
vwmaniac
Full Member
Karma: +8/-5
Offline
Posts: 174
|
|
« Reply #111 on: May 08, 2013, 05:50:59 PM »
|
|
|
If someone could check this i would appreciate it. Thank You. My car does not have a brake switch so i can not check if it works or not.
B_br 0x00FD3C bit mask >Bit mask .10 > 1E A0
B_kuppl 0x00FD3C > Bit mask .14 > 1E E0
vfil_w 0x380D9E > 9E 8D
Nmot_w 0x00F868 > 68 F8
Wped 0x380AD3 > D3 8A
Tsrldyn 0x380D1C > 1D 8D
Condition variables at 17E00-08
location 568FE
DA 87 00 A7 D7 40 06 02 03 F8
location 07 A7 00
9A 1E 13 E0 F2 F4 9E 8D D7 00 81 00 F2 F9 00 7E
40 49 9D 0B F2 F4 68 F8 D7 00 81 00 F2 F9 02 7E
40 49 FD 03 F7 8E 1C 8D 0D 2F 9A 1E 29 E0 8A 1E
22 A0 F2 F4 68 F8 D7 00 81 00 F2 F9 06 7E 40 49
FD 1A C2 F4 D3 8A D7 00 81 00 C2 F9 08 7E 40 49
FD 12 D7 00 38 00 F2 F4 F0 4F D7 00 81 00 F2 F9
04 7E 40 49 9D 11 F7 8E 1C 8D 08 41 D7 00 38 00
F7 F8 F0 4F 0D 09 D7 00 38 00 F6 8F F0 4F 0D 04
D7 00 38 00 F6 8E F0 4F F3 F8 74 8B DB 00 FF FF
|
|
|
|
|
Logged
|
|
|
|
|
vwnut8392
|
|
« Reply #112 on: June 12, 2013, 06:45:01 PM »
|
|
|
i've tried patching with PHP and with the EXE file and all i get is an output with a bunch of data scrolling down my screen and no file. im trying to do an 8D0907551A ECU for a 2000 audi S4. i have a good output file from ME7logger thats renamed dump.ecu in the same folder and my S4 binary renamed ecu.bin. i have no idea why its its not giving me an output file at all. someone please help. scratch this, i got it working. i must have got a bad download of the PHP script. |
|
|
|
« Last Edit: June 21, 2013, 11:21:06 AM by vwnut8392 »
|
Logged
|
|
|
|
vwmaniac
Full Member
Karma: +8/-5
Offline
Posts: 174
|
|
« Reply #113 on: June 21, 2013, 10:26:42 AM »
|
|
|
If someone could check this i would appreciate it. Thank You. My car does not have a brake switch so i can not check if it works or not.
B_br 0x00FD3C bit mask >Bit mask .10 > 1E A0
B_kuppl 0x00FD3C > Bit mask .14 > 1E E0
vfil_w 0x380D9E > 9E 8D
Nmot_w 0x00F868 > 68 F8
Wped 0x380AD3 > D3 8A
Tsrldyn 0x380D1C > 1D 8D
Condition variables at 17E00-08
location 568FE
DA 87 00 A7 D7 40 06 02 03 F8
location 07 A7 00
9A 1E 13 E0 F2 F4 9E 8D D7 00 81 00 F2 F9 00 7E
40 49 9D 0B F2 F4 68 F8 D7 00 81 00 F2 F9 02 7E
40 49 FD 03 F7 8E 1C 8D 0D 2F 9A 1E 29 E0 8A 1E
22 A0 F2 F4 68 F8 D7 00 81 00 F2 F9 06 7E 40 49
FD 1A C2 F4 D3 8A D7 00 81 00 C2 F9 08 7E 40 49
FD 12 D7 00 38 00 F2 F4 F0 4F D7 00 81 00 F2 F9
04 7E 40 49 9D 11 F7 8E 1C 8D 08 41 D7 00 38 00
F7 F8 F0 4F 0D 09 D7 00 38 00 F6 8F F0 4F 0D 04
D7 00 38 00 F6 8E F0 4F F3 F8 74 8B DB 00 FF FF
I rewired both clutch and brake switches but i get nothing, i can see both switches functioning in vag-com but the function does not work, i have also tried multiple ram locations for the counter but it still does not work. i have coilpack design in my 12v vr6 me7.1 system not individual coils so im wondering if that is a hardware issue. if someone could please help me i would be forever greatful!! Here are my original .bin my .ecu and the new .bin with the function, call ect... |
|
|
|
|
Logged
|
|
|
|
|
vwnut8392
|
|
« Reply #114 on: June 21, 2013, 11:19:39 AM »
|
|
|
i would suggest the auto add PHP script thats floating around on here. once i got it working right it adds the custom code and works perfect every time.
I rewired both clutch and brake switches but i get nothing, i can see both switches functioning in vag-com but the function does not work, i have also tried multiple ram locations for the counter but it still does not work. i have coilpack design in my 12v vr6 me7.1 system not individual coils so im wondering if that is a hardware issue. if someone could please help me i would be forever greatful!! Here are my original .bin my .ecu and the new .bin with the function, call ect...
|
|
|
|
|
Logged
|
|
|
|
|
vwnut8392
|
|
« Reply #115 on: June 21, 2013, 11:25:48 AM »
|
|
|
I have tested this on 2 cars, one being a 2000 B5 S4 and and a 2004 R32. the R32 works beautifully but the S4 is a different story. the S4 doesnt hold at the set RPM for the anti-lag. it pushes through the RPM the whole way to red line. it does cut spark like its supposed to but it doesnt hold at the set lower RPM value like the R32 does. what could be causing this?
|
|
|
|
|
Logged
|
|
|
|
vwmaniac
Full Member
Karma: +8/-5
Offline
Posts: 174
|
|
« Reply #116 on: June 21, 2013, 02:00:10 PM »
|
|
|
i would suggest the auto add PHP script thats floating around on here. once i got it working right it adds the custom code and works perfect every time.
I actually did use the script to check my work and everything was the same. so i dont know what the problem is. Also how would i know if its cutting spark and pushing thru the limiter, other than hearing some pops and bags as the rev limit increases? would i see it in the misfire counter? Could someone please use the script to create the new .bin because the .exe version i used comes up with an error after it gives me the offsets to use. Thank you for the reply |
|
|
|
|
Logged
|
|
|
|
|
vwnut8392
|
|
« Reply #117 on: June 21, 2013, 09:03:00 PM »
|
|
|
I actually did use the script to check my work and everything was the same. so i dont know what the problem is. Also how would i know if its cutting spark and pushing thru the limiter, other than hearing some pops and bags as the rev limit increases? would i see it in the misfire counter? Could someone please use the script to create the new .bin because the .exe version i used comes up with an error after it gives me the offsets to use. Thank you for the reply
yeah you can hear it cutting ignition even though its pushing through to the rev limiter. when i do it on the B5 S4 you here it cut at the RPM i set for it to cut ignition at but it keeps reving to 7200RPM in my case. im not sure if its retarding the timing enough in my case. also there is no setting in the code to set how much timing is removed from the anti-lag. |
|
|
|
|
Logged
|
|
|
|
vwmaniac
Full Member
Karma: +8/-5
Offline
Posts: 174
|
|
« Reply #118 on: June 27, 2013, 02:29:19 PM »
|
|
|
yeah you can hear it cutting ignition even though its pushing through to the rev limiter. when i do it on the B5 S4 you here it cut at the RPM i set for it to cut ignition at but it keeps reving to 7200RPM in my case. im not sure if its retarding the timing enough in my case. also there is no setting in the code to set how much timing is removed from the anti-lag.
I used the script produced anti lag .bin and it still dosnt work. The script dosnt find ftomn but i have a damos for the 12v vr6 so i knew where it was and edited it. I also change where the counter goes since it used 4ff0 and im not entirely sure that is free space in my ecu. i used what i believe is free space @ 008310 figuring that would be 0x380310 would my thinking be correct. because looking at 4ff0 which i thought would be 384ff0 and in my bin 0x00cff0 which look to be used. here is the script created fine and the original. hopefully you guys could help me to get this working. Thank you in advance i appreciate all the help so far. |
|
|
|
|
Logged
|
|
|
|
pedrosousa
Full Member
Karma: +3/-0
Offline
Posts: 75
|
|
« Reply #119 on: August 27, 2013, 05:57:44 AM »
|
|
|
OK I was trying this again, used the v6 and now it builds boost but doesn't hold the rpm, didn't try the nls.
I used
FTMON = 0
RPM threshold = 5000
LaunchRPM = 5500
Speed threshold 3.3
Ingition cut duration = 200 also tried 160 and 260
ACC pedal threshold = 90
What's wrong?
|
|
|
|
|
Logged
|
|
|
|
|
