Pages: 1 [2]
Author Topic: ME7.5 1000cc  (Read 13095 times)
phila_dot
Hero Member
*****

Karma: +171/-11
Offline Offline

Posts: 1709


« Reply #15 on: June 13, 2013, 09:13:47 PM »

Added?

What changes to FKKVS did you make?

If the original value was 1, you should have changed it to 0.9.

Posting a log might be a good idea too.
Logged
holdingboost
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #16 on: April 24, 2024, 07:02:26 PM »

Hello,

I have a ME7.5 project with 1000cc injectors.  The TVUB, and KRKTE calculated appropriately.  Idle raised a little to ease the pain, but still having fueling trouble at idle.

At idle it runs rich constantly, .85-.90, the ECU shows O2 correction bouncing around -10-20% yet the injector on time is constant and appears to be on some kind of limit?

Tried lowering TEMIN, it is .6 stock in the file, I've cut it in half with no change in idle.  Read the entire section on injector on time calculation and haven't seen any other values that might be interfering.

Any ideas?Huh
Im running Bosch 1000cc with a 4bar fpr and i have my TEMIN @ 0.320 And KRKTE @ 0.02842
I dont know what turbo you have tho, im not running a maf because of the turbo i have it too big to fit it..
Logged
_nameless
Hero Member
*****

Karma: +323/-449
Offline Offline

Posts: 2693



« Reply #17 on: Yesterday at 06:47:06 AM »


Why would you bump a 11 year old thread, just make a new one with proper info.
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)