NefMoto > Technical > Tuning > The Volvo ME7 thread:
Pages: 1 ... 61 62 [63] 64 65 ... 182
« previous next »
Author Topic: The Volvo ME7 thread:  (Read 1084360 times)
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 400
« Reply #930 on: April 24, 2017, 10:01:06 AM »
Brief glance at the binary, looks like:
0x16E3A DSLGRAD
0x16E3C DSLOFS

LMK if that doesn't fit.
Logged
contrast
Full Member
***

Karma: +20/-3
Offline Offline

Posts: 215
« Reply #931 on: April 24, 2017, 10:30:00 AM »
R has DECOS and other stuff. Install the boost/iat sensor that the car has from factory and go from there...
Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #932 on: April 24, 2017, 01:23:13 PM »
Quote from: nubcake on April 24, 2017, 10:01:06 AM
Brief glance at the binary, looks like:
0x16E3A DSLGRAD
0x16E3C DSLOFS

LMK if that doesn't fit.

Respect for that.. how did you locate this ? I have searched a lot to find it.. im sure this i correct.. values almost match the values from en ME7.0 A2L just a small difference :-)

Thx for your help :-)
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 400
« Reply #933 on: April 24, 2017, 02:27:22 PM »
Quote from: Rittersport on April 24, 2017, 01:23:13 PM
Respect for that.. how did you locate this ? I have searched a lot to find it.. im sure this i correct.. values almost match the values from en ME7.0 A2L just a small difference :-)

Thx for your help :-)

Code disassembly.
Have some fully defined reference Volvo binary, so just compared this one to that.

EDIT: mentioned binary/A2L is floating around the net and is included in cracked ols for example. Search for "1xEbvsde.a2l" and matching hex file.
« Last Edit: April 24, 2017, 03:08:34 PM by nubcake » Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #934 on: April 25, 2017, 04:02:14 PM »
Hi Again

Well car runs okay now. 310Bhp 430Nm at app. 1.1 bar boost. Sadly im fighting with 2 error codes and limpmode.
981A that is Torque monitoring.
6806 that is Turbo charger system control system flow fault. Flow too low.

Anyone know how to get rid of these ?

The car needs to run on Nürnburg this weekend. 

Any help highly appreciated
Logged
contrast
Full Member
***

Karma: +20/-3
Offline Offline

Posts: 215
« Reply #935 on: April 25, 2017, 10:49:18 PM »
Quote from: Rittersport on April 25, 2017, 04:02:14 PM
Hi Again

Well car runs okay now. 310Bhp 430Nm at app. 1.1 bar boost. Sadly im fighting with 2 error codes and limpmode.
981A that is Torque monitoring.
6806 that is Turbo charger system control system flow fault. Flow too low.

Anyone know how to get rid of these ?

The car needs to run on Nürnburg this weekend. 

Any help highly appreciated

Must be tuned correctly to avoid these errors. Assuming all sensors are correct for the car and car itself is mechanically good.
Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #936 on: April 26, 2017, 02:25:50 AM »
Quote from: contrast on April 25, 2017, 10:49:18 PM
Must be tuned correctly to avoid these errors. Assuming all sensors are correct for the car and car itself is mechanically good.

Everything should be ok.. K24 R turbo.. Large FMIC, 550cc nozzles. complete 3" BSR Exhaust system incl. DP with race cat. 300kpa Boost sensor

Fueling alligned with KRKTE. Boost sensor with DSLGRAD to show correct Atm pressure.

Is it allowed to attach the modded file here for people to have a look ? Im not sure if i did coorect allign KFMIOP and KFMIRL
Logged
contrast
Full Member
***

Karma: +20/-3
Offline Offline

Posts: 215
« Reply #937 on: April 26, 2017, 02:56:08 AM »
You can post file.
Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #938 on: April 26, 2017, 03:06:36 AM »
Quote from: contrast on April 26, 2017, 02:56:08 AM
You can post file.
File Attached

Original is in the post above.

Pls comment
« Last Edit: April 27, 2017, 05:58:55 AM by Rittersport » Logged
contrast
Full Member
***

Karma: +20/-3
Offline Offline

Posts: 215
« Reply #939 on: April 26, 2017, 04:12:01 AM »
Why did you install 300kPa boost sensor?

KRKTE is incorrect, LAMFA - why so rich at idle and low load??
IRL/IOP would need adjustments.
You've missed some important maps to actually gain considerable power.
The car definitely doesnt have 310BHP atm.
What are you using to log?
Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #940 on: April 26, 2017, 04:39:32 AM »
Quote from: contrast on April 26, 2017, 04:12:01 AM
Why did you install 300kPa boost sensor?

KRKTE is incorrect, LAMFA - why so rich at idle and low load??
IRL/IOP would need adjustments.
You've missed some important maps to actually gain considerable power.
The car definitely doesnt have 310BHP atm.
What are you using to log?

Well as im in the phase of learing the ME7 im not perfect.. KRKTE is set according to lambda adaption at idle and partload it's now arround +1%
I have tried to read about the IRL and IOP maps how to set but apparently i have missed something.
LAMFA is set low for safety durring mapping.. i will set it right when i have en other stuff right.
I have an Autel DS708 for logging.
I use WinOLS and OLS300 on the ECU.
I have tuned Diesel's for more than 10 years but i want to learn this also.
Know that there might be maps i missed but i dont have A2L for the ME 7.0.1

My Dyno is calibrated and i measure 309 engine HP and 430Nm torque.

Help is highly appreciated
« Last Edit: April 26, 2017, 04:47:39 AM by Rittersport » Logged
contrast
Full Member
***

Karma: +20/-3
Offline Offline

Posts: 215
« Reply #941 on: April 26, 2017, 04:52:19 AM »
How much at the wheels?
Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #942 on: April 26, 2017, 05:40:46 AM »
Quote from: contrast on April 26, 2017, 04:52:19 AM
How much at the wheels?

I will have a look but i assume 30-40Hp less
Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #943 on: April 26, 2017, 01:09:07 PM »
Quote from: contrast on April 26, 2017, 04:52:19 AM
How much at the wheels?

271Hp on the wheels

Can you give a some hints ?
Logged
Rittersport
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13
« Reply #944 on: April 27, 2017, 06:00:48 AM »
Any comments or hints regarding the missing maps ?
Logged
Pages: 1 ... 61 62 [63] 64 65 ... 182
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 08:27:41 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 18 queries. (Pretty URLs adds 0s, 0q)