Pages: [1]
Author Topic: Very Basic Guide on defining maps using Winols & comparison  (Read 3313 times)
ko_racer
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: March 08, 2013, 07:46:19 AM »

This is probably all pretty basic to most in the know already, but this is aimed at determined beginers.
I've only recently started to get my head around, what is needed to create a definition file and how to go about it in Winols

I've attached a pdf which gives some basic instructions.  It's all what I've learned myself so far, so if onything is blatently wrong please let me know.

You'll need a bit of common sense as I've not given step by step info, but a rough guide of how I use Winols and some of the little things that took me some time work out.

Happy for any comments (positive or negative), suggestions or other tips I can add.

Keith
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)