Pages: [1]
Author Topic: KFKEF  (Read 5850 times)
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« on: March 28, 2013, 07:52:49 AM »

Hi

Anyone care to give a simple explanation on what this map does?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #1 on: March 28, 2013, 08:28:49 AM »

i think thats the knock control filters
Logged
phila_dot
Hero Member
*****

Karma: +171/-11
Offline Offline

Posts: 1709


« Reply #2 on: March 28, 2013, 08:46:49 AM »

I'm pretty sure that it's just the threshold for knock detection.
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #3 on: March 28, 2013, 08:57:33 AM »

there shouldnt be a need to modify anything in there, I see the file that was on my car had changes made to these maps.
Logged
phila_dot
Hero Member
*****

Karma: +171/-11
Offline Offline

Posts: 1709


« Reply #4 on: March 28, 2013, 09:05:46 AM »

No.

I would suggest against it.

The threshold was raised?
Logged
catbed
Sr. Member
****

Karma: +8/-1
Offline Offline

Posts: 300


« Reply #5 on: March 28, 2013, 09:13:26 AM »

I have an OTS tune from a major company and these maps were changed as well. They are fairly conservative stock, but what maps aren't. If you want to adjust knock control, I think the consensus is to adjust how much timing is pulled per knock event detected.
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #6 on: March 28, 2013, 11:01:32 AM »

No.

I would suggest against it.

The threshold was raised?

The values were lowered, so lets say at 3200rpm/45 the value was 3.3750 stock, in the file that was on my car it was 3.000
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)