Question on Change S4 to RS4 cluster

Pages: 1 [2]

« previous next »

Author

Topic: Question on Change S4 to RS4 cluster (Read 24817 times)

rnagy86

Sr. Member

Karma: +6/-11
Offline

Offline

Posts: 367

	Re: Question on Change S4 to RS4 cluster « Reply #15 on: April 15, 2013, 03:01:07 AM »

Okay I was wrong, after flashing the eeprom from the S4 cluster I noticed that the oil temperature
gauge stopped working. I flashed the original one back and voila it works. Do you guys have any idea?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Question on Change S4 to RS4 cluster « Reply #16 on: July 09, 2013, 09:54:39 AM »

No clue on the oil temp issue... but i have run in to another issue.. the miles to empty reading is very wrong (about 30% high)...

Is the RS4 fuel tank bigger or something?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

rnagy86

Sr. Member

Karma: +6/-11
Offline

Offline

Posts: 367

	Re: Question on Change S4 to RS4 cluster « Reply #17 on: July 09, 2013, 12:17:51 PM »

Well the cluster code is different, so even the speed/rpm readings were a bit off with the S4 cluster dump written to the RS4 cluster, so I reverted back to the RS4 one and killed the immo led.

The fuel tanks are the same, both being 62 litres.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Question on Change S4 to RS4 cluster « Reply #18 on: July 09, 2013, 09:58:37 PM »

Well this is curious

4Z7907551R.csv:"KVNPZ","0x101b7","normierter Krafstoffverbrauch pro Zylinder f▒r Kombiausgabe","1x1","8 Bit","-","L/Zyl.","-","-","20.0","1.0","1.0","840.0","840.0","0x2a","0x2a"
8D0907551F.csv:"KVNPZ","0x1019e","normierter Krafstoffverbrauch pro Zylinder f▒r Kombiausgabe","1x1","8 Bit","-","L/Zyl.","-","-","20.0","1.0","1.0","600.0","600.0","0x1e","0x1e"
8D0907551G.csv:"KVNPZ","0x101a1","normierter Krafstoffverbrauch pro Zylinder f▒r Kombiausgabe","1x1","8 Bit","-","L/Zyl.","-","-","20.0","1.0","1.0","840.0","840.0","0x2a","0x2a"


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Question on Change S4 to RS4 cluster « Reply #19 on: July 16, 2013, 10:31:17 PM »

Seems as though the issue is that the RS4 cluster somehow ignores FKVA... which is problematic because the max KVB isn't big enough for my injectors. Now experimenting with KVNPZ...


	Logged

rnagy86

Sr. Member

Karma: +6/-11
Offline

Offline

Posts: 367

	Re: Question on Change S4 to RS4 cluster « Reply #20 on: July 17, 2013, 01:09:24 AM »

That might be the issue then. I am only running 550cc EV14s and my consumption display usually shows
the correct values.


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Question on Change S4 to RS4 cluster « Reply #21 on: July 17, 2013, 05:09:47 AM »

That calculation is done in the ECU software and the result is sent to the cluster on the CANbus.

Coding issue or max limit in the cluster maybe?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Question on Change S4 to RS4 cluster « Reply #22 on: July 17, 2013, 08:54:20 AM »

Quote from: phila_dot on July 17, 2013, 05:09:47 AM

That calculation is done in the ECU software and the result is sent to the cluster on the CANbus.

Coding issue or max limit in the cluster maybe?

That was my understanding as well. I'll know pretty soon, got an almost empty tank of gas now.


	Logged

NOTORIOUS VR

Administrator
Hero Member

Karma: +58/-7
Offline

Offline

Posts: 1056

	Re: Question on Change S4 to RS4 cluster « Reply #23 on: July 17, 2013, 11:23:05 AM »

Quote from: nyet on July 16, 2013, 10:31:17 PM

Seems as though the issue is that the RS4 cluster somehow ignores FKVA... which is problematic because the max KVB isn't big enough for my injectors. Now experimenting with KVNPZ...

I had that issue (ignoring FKVA) but never got to the bottom of it.... I'm curious to see if you get that resolved though


	Logged

SCHNELL ENGINEERING BLOG · STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Question on Change S4 to RS4 cluster « Reply #24 on: July 17, 2013, 11:30:27 AM »

I'm rapidly cooling off on this rs4 cluster thing.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Question on Change S4 to RS4 cluster « Reply #25 on: July 18, 2013, 02:36:01 PM »

I have verified that neither KVB nor KVNPZ have any effect on the RS4 cluster. No idea why.

However, maxing KVB and the cluster adaptation to 115% gets me close enough ... so I guess thats that for now.

So anybody wanting to use >900cc injectors with M-box and RS4 cluster will want to consider moving to K-box (which I assume works correctly, although i have not tried it yet)


	Logged

ddillenger

Moderator
Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Question on Change S4 to RS4 cluster « Reply #26 on: July 18, 2013, 03:11:55 PM »

Quote from: nyet on July 18, 2013, 02:36:01 PM

although i have not tried it yet)


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 06:36:05 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search