can not connect

Pages: [1]

« previous next »

Author

Topic: can not connect (Read 6773 times)

Socalk61000

Newbie

Karma: +0/-0
Offline

Offline

Posts: 1

	can not connect « on: April 07, 2013, 11:43:50 PM »

ok so ive been trying and trying to get my cable to connect and it wont do it it just keeps saying

Failed to read test echo from FTDI device.
Could not open FTDI device.

I think I re did the drivers right and when i hover over the ross tech usb device it says premium features supported but it wont do anything please help


	Logged

hello

Full Member

Karma: +1/-0
Offline

Offline

Posts: 64

	Re: can not connect « Reply #1 on: July 16, 2013, 07:24:36 PM »

Are your drivers installed correctly?


	Logged

aysix

Jr. Member

Karma: +12/-0
Offline

Offline

Posts: 37

	Re: can not connect « Reply #2 on: August 10, 2013, 11:47:36 AM »

Which cable? What OS are you using?


	Logged

Silly Rabbit 6 speed A6

ddillenger

Hero Member

Karma: +638/-21
Offline

Offline

Posts: 5640

	Re: can not connect « Reply #3 on: August 10, 2013, 11:56:12 AM »

You need to deselect "Boot in intelligent mode" in the VCDS settings.

Also, it doesn't hurt to install the VCP (virtual com-port) drivers as well, as they're needed for argdubs tool, and many others.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

nattyS4

Newbie

Karma: +0/-1
Offline

Offline

Posts: 15

	Re: can not connect « Reply #4 on: August 21, 2013, 06:02:38 AM »

Did u ever figure out what the issue was? im having the same error but i'm using a dumb cable so not really sure, I think its a driver issue.


	Logged

hello

Full Member

Karma: +1/-0
Offline

Offline

Posts: 64

	Re: can not connect « Reply #5 on: August 27, 2013, 06:38:42 AM »

Quote from: nattyS4 on August 21, 2013, 06:02:38 AM

Did u ever figure out what the issue was? im having the same error but i'm using a dumb cable so not really sure, I think its a driver issue.

Try to uninstall the drivers. http://www.ftdichip.com/FTDrivers.htm

Get the latest and then try again. Let us know.


	Logged

adam-

Hero Member

Karma: +122/-33
Offline

Offline

Posts: 2178

	Re: can not connect « Reply #6 on: August 28, 2013, 07:05:08 AM »

Use the newest drivers from the FTDI site - I use the Virtual ones, seem to work first time, every time. Using a cheap eBay copy.

Make sure your port number is right in device manager, if not, change it between 1 and 4.

I like it set at 3. If you switch USB ports, the port number sometimes changes, so try and always use the same port!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 25, 2024, 12:37:17 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search