Pages: 1 [2]
Author Topic: What else can stop rlmax_w from from following LDRXN  (Read 14294 times)
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #15 on: April 18, 2013, 08:54:10 AM »

Perhaps ASR is intervening?

That won't limit rlmax just rlsol.

You're going to have to log the other variables. What ECU?
Logged
black
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 80


« Reply #16 on: April 18, 2013, 08:57:01 AM »

That won't limit rlmax just rlsol.

You're going to have to log the other variables. What ECU?

I know ASR intervening from other cars - but then I see the ASR lamp flashing on dash

And you feel massive intervention from ASR if active, but it's not

rs4 - k
« Last Edit: April 18, 2013, 09:03:46 AM by black » Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037


« Reply #17 on: April 18, 2013, 01:55:24 PM »

black, I have no problem exceeding that...

Send me the bin on e-mail...
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
rufusgti
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 32


« Reply #18 on: April 21, 2013, 01:07:32 PM »

What is the maximum value on %load axis used to specify optimum torque in the map KFMIOP? Load in LDRXN doesn't exceed this value.
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #19 on: April 21, 2013, 01:39:39 PM »

What is the maximum value on %load axis used to specify optimum torque in the map KFMIOP? Load in LDRXN doesn't exceed this value.

You have that backwards.

Torque has no influence on rlmax, but rlmax has axis for KFMIOP.
Logged
bbernd
Guest
« Reply #20 on: April 25, 2013, 10:15:33 PM »

---
« Last Edit: April 27, 2013, 07:47:03 AM by tudor » Logged
Bische
Sr. Member
****

Karma: +25/-4
Offline Offline

Posts: 397



WWW
« Reply #21 on: April 26, 2013, 09:44:49 PM »

 Smiley
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)