running an ABA 16V G60 on ME7?

Pages: [1]

« previous next »

Author

Topic: running an ABA 16V G60 on ME7? (Read 5496 times)

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	running an ABA 16V G60 on ME7? « on: April 23, 2013, 10:37:47 AM »

i built a 16V G60 engine using an OBD1 ABA bottom end, 9A 2.0 16V pistons, 1.8 16v head. i have a digifant 1 setup for it but i was roaming around my garage and stumbled on an engine harness and ECU that i started modding for an MK2 1.8T swap. Im curious as to if i may be able to retrofit this fuel system to my 16v G60 and make it run smoothly and be reliable. i've thought about it alot and i cant see any loop holes in the idea but i figured id toss the idea out there and see if theres anything i may be missing.


	Logged

NOTORIOUS VR

Administrator
Hero Member

Karma: +58/-7
Offline

Offline

Posts: 1056

	Re: running an ABA 16V G60 on ME7? « Reply #1 on: April 23, 2013, 11:08:41 AM »

The main points would be to make sure the Crank and Cam sensors that ME7 expects to see are present on the 16V and "sync'd" correctly. The rest would be pretty easy IMO.

You'd have to use individual coils as well. And to be on the safe side the CLT and IAT sensors from the ME7 car.


	Logged

SCHNELL ENGINEERING BLOG · STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning

vwmaniac

Full Member

Karma: +8/-5
Offline

Offline

Posts: 174

	Re: running an ABA 16V G60 on ME7? « Reply #2 on: April 23, 2013, 04:43:24 PM »

Quote from: vwnut8392 on April 23, 2013, 10:37:47 AM

do it, i run my mk3 vr6 on me7.1 and i love it. very easy to swap and works with the oe cluster and fully tuneable.


	Logged

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	Re: running an ABA 16V G60 on ME7? « Reply #3 on: May 07, 2013, 10:02:57 AM »

Well the block im using is an ABA block so it has the trigger wheel on the crank and i figure i could modify the distributor to have a single window hall sensor setup for a cam sensor. I've built a fair share of AAN 20VT engines and i have one of the tuna can distributor covers from an early engine before audi decided to add the true cam sensor. adding the IAT sensor and the MAP sensor seems fairly easy but getting rid of things like the N75 valve and the N249 valve plus getting the ECU dialed in is my main concern.


	Logged

RaraK

Hero Member

Karma: +58/-2
Offline

Offline

Posts: 539

	Re: running an ABA 16V G60 on ME7? « Reply #4 on: May 07, 2013, 10:39:31 AM »

not very difficult at all to tune the car, its the physical connectivity and proper sensor synchronization which will be the difficult task in my eyes.

i recognize your name, you from pittsburgh area no? I can be of some help i live in pittsburgh as well if thats the case.


	Logged

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	Re: running an ABA 16V G60 on ME7? « Reply #5 on: May 07, 2013, 11:24:59 AM »

Yes actually i am from the pittsburgh area, i live around 30 miles outside pittsburgh.


	Logged

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: running an ABA 16V G60 on ME7? « Reply #6 on: May 07, 2013, 02:09:59 PM »

Top-end part -> http://forums.vwvortex.com/showthread.php?4001222

Throttle body also.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 01:44:50 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search