Pages: [1]
Author Topic: Chip 1.8t 190km audi a4 b6 - fault flash please help me  (Read 4553 times)
krzys_8x
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: April 30, 2013, 11:21:47 AM »

Hello.

I have problem, i send my original flash to te organisation tuning.

Remaping flash after loading causes no engine starting and continuously activated for windmills. Please modifications included an assessment or charge because I miss the idea that the car does not want to go. Thank you.

I enclose a few batches that I would ask to assess the best and possibly modify to my audi rode. thank you
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041


« Reply #1 on: April 30, 2013, 02:51:31 PM »

This "tuning" is horrible.

KFPED bumped by 7% flat.
KFMIOP bumped by 15% flat.
KFMIRL bumped by 15% flat.
KFZW/KFZW2/KFZWOP/KFZWOP2 added 1.5 degrees flat.
Rev limit set to 7500
KFLDIMX bumped by 5% flat.
KFLDHBN increased flat.
LDRXN increased by 35 flat.

Whoever made this needs his + button removed from his keyboard. Please don't anyone run this on your car!

Where are you located? Your ECU will need to be flashed in boot mode.
You can send it to me and I can fix it...
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
vagenwerk
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 182


« Reply #2 on: April 30, 2013, 03:12:13 PM »

this rev limit is really dangerous ! would kill engine if you rev to max
Logged
krzys_8x
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #3 on: April 30, 2013, 07:28:08 PM »

Colleagues, I'm fine with putting the ecu, but I have a request - the date trick me so convert flash to the car rode and had raised power? I'm interested in raising as much as possible, and increase the bottom because it is automatic and will be terribly when harvested. I can count on your help, fellas? Sending the original charge, which is currently riding an original of my driver. Can you help me?
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041


« Reply #4 on: April 30, 2013, 11:35:34 PM »

Typing through a translator makes it quite impossible to understand what you want to do.

Regardless, no one is going to tune your car for free here. This site is for learning yourself.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
krzys_8x
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #5 on: May 01, 2013, 06:04:17 AM »

Thank you for answer. Goodbye
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)