Pages: 1 2 [3]
Author Topic: rl > (rlmax_w, rlmx_w and rlsol_w)  (Read 17183 times)
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #30 on: September 13, 2019, 03:53:01 PM »

KFLDHBN @1EE7E and all FF
Log it if that is not big problem
Logged
brs
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 61


« Reply #31 on: September 14, 2019, 02:30:47 PM »

New log here
seems  rlmax_w following ldrlts_w but my KFLDHBN all FF
My KFLDHBN address is wrong ? can someone check it?
@1EE7E 8x8
or what else could cause this?

Logged
brs
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 61


« Reply #32 on: September 15, 2019, 09:08:25 AM »

update
my KFLDHBN address is correct,today tested.if i make orijinal to KFLDHBN ldrlts_w seems decrease..
Well now what's wrong?
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #33 on: September 15, 2019, 09:17:41 AM »

New log here
seems  rlmax_w following ldrlts_w but my KFLDHBN all FF

My KFLDHBN address is wrong ? can someone check it?
@1EE7E 8x8
or what else could cause this?


they are not, how it is posibble you can't see what is sooo obvius
Yes your adress is correct, but you don't have FF values in that map. Values in that map are for some slighti tuned 1.8T
Logged
brs
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 61


« Reply #34 on: September 15, 2019, 09:41:35 AM »

they are not, how it is posibble you can't see what is sooo obvius
Yes your adress is correct, but you don't have FF values in that map. Values in that map are for some slighti tuned 1.8T

i didn't never post my mod file in here.I don't know what file you're looking  but you're probably reviewing my ori file..
KFLDHBN is all FF in my mod file,as shown in attached picture

Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #35 on: September 15, 2019, 10:11:52 AM »

Why you didn't post your tuned file?
Logged
brs
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 61


« Reply #36 on: September 16, 2019, 12:50:14 AM »

Any idea?
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)