Pages: [1]
Author Topic: Overboost logs  (Read 12430 times)
chirp
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 11


« on: February 14, 2011, 05:50:45 PM »

I was wondering if someone could take a look at my logs and tell why I am overboosting? Is my N75 not working properly? Can you tell that from a log?
Overboosting started when I gutted my cats and precats.

Thanks.
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #1 on: February 14, 2011, 06:13:02 PM »

What tune do you have? Have you pressure tested?
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
chirp
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 11


« Reply #2 on: February 14, 2011, 06:44:58 PM »

Actually I am not sure what tune I have. It was on the car when I bought it 2 years ago. Up until now it has been smooth and has had no issues.
A 2 months or so ago I developed a rough idle/ misfire. About 2 weeks ago I started overboosting.

I have pressured cheked. I found 2 small leaks and fixed them, but i made no difference in my overboosting.
I used to spike at 15 and taper to 11. Now I spike at 19, ECU cuts boost to 10, and them it levels out at 12.
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #3 on: February 15, 2011, 09:30:00 AM »

Well then I would start to look deeper into the N75, check plugs, boots, CP's, etc..

Also, you know this is a tuning forum right?  This isn't really a help me my car is broken forum...
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
chirp
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 11


« Reply #4 on: February 15, 2011, 10:49:22 AM »

I understand this is not a fix my car thread. I asked the question on audizine and nef told me to post my logs here because there was alot of knowledge floating around over here. Thats cool if you don't want to help. I didn't know I someone could tell if the N75 was not acting right by looking at the logs.

I am tuning as well, but this boost spike has put a hold on changing anything else.

No problem man.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #5 on: February 15, 2011, 10:58:10 AM »

Also, you know this is a tuning forum right?  This isn't really a help me my car is broken forum...

I think it is valid to discuss these types of issues here because we all need experience debugging the ME7 before we can tune it better.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #6 on: February 15, 2011, 11:07:03 AM »

I see one place in the log where the actual boost is 2170 and the requested boost is 1750. Looking at the log before that, it seems as though the ECU overshot the requested boost. This would mean that the boost either took too long to build up, or that it was too slow to drop off once the requested was reached.

It is possible that gutting your cats and precats has reduced your back pressure enough that the boost no longer drops off quickly.

Most GIAC tunes disable the boost deviation limit and so this is never a problem with them. If you read your ECU with the NefMoto flashing tool, we could see what the boost deviation limit has been set to.

I am assuming you have scanned for error codes with VAG-COM?
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
chirp
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 11


« Reply #7 on: February 15, 2011, 11:32:33 AM »

Yes I have scanned with vag. One code for positive deviation.
I Did read my ECU last night and saved it. I am going to start looking at it tonight. I'd like to figure out how to delete the upper limit of the boost, or at least raise it so it wouldn't cut back after it spikes.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #8 on: February 15, 2011, 02:47:24 PM »

btw i have a data plotter for VCDS/ECUx

http://nyet.org/cars/ECUxPlot/
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #9 on: April 19, 2011, 10:15:30 PM »

I know it's an old thread, but have you looked at your map sensor? It seems unlikely for boost to rise that quickly over less than 1 sec. I have seen this problem a few times before, and it was a false reporting map sensor/wiring problem.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)