NefMoto > Technical > Tuning > Ditching the stock narrowband 02's and using dual WB with simulated output?
Pages: [1]
« previous next »
Author Topic: Ditching the stock narrowband 02's and using dual WB with simulated output?  (Read 5790 times)
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
So I'm going to be ordering a pair of spartan 14point7's. I figured why not toss the stock narrowbands and use the simulated output from the widebands. I know british was talking about this, but has anyone else done it on a street car for an extended amount of time?
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
I wouldn't.

There is no real gain as narrowband sensors work incredibly well in their intended application and your giving up a much better control and diagnostic system for the bare minimum provided with an external WB controller.
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617
Quote from: phila_dot on June 06, 2013, 04:58:02 PM
I wouldn't.

There is no real gain as narrowband sensors work incredibly well in their intended application and your giving up a much better control and diagnostic system for the bare minimum provided with an external WB controller.

would you however recommend doing the dual spartan 14point7 wideband logging inputs into the rear o2's?  it seems like the best innovation on here since the 5120 hack.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
Quote from: nehalem on June 06, 2013, 05:13:33 PM
would you however recommend doing the dual spartan 14point7 wideband logging inputs into the rear o2's?  it seems like the best innovation on here since the 5120 hack.

This is why I'm buying dual spartans.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536
Quote from: nehalem on June 06, 2013, 05:13:33 PM
would you however recommend doing the dual spartan 14point7 wideband logging inputs into the rear o2's?  it seems like the best innovation on here since the 5120 hack.
I'm going to be doing this today with the output from Zeitronix. I haven't seen anything posted on here (though I did chat with britishturbo about this via PM a couple of weeks ago).  I'll have to go look at what people have been posting.
Logged
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536
Oh, and on the simulated NB topic, I know snowtrooper is/was doing that for a while.  As was Marcellus I believe.  Not sure if they ditched it or not.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
i removed the stock narrowband and stuck a wideband in its place as well. used the wideband controller to feed the 0-1v signal to the ecu. seemed to work fine. b5 1.8t big turbo.
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617
so basically could just run two spartan 14point7's in the Primary O2 spots and just feed the NB inputs into the front NB inputs, and then run the widebands into the rear stock narrowbands?   thats hot...
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
Quote from: nehalem on June 07, 2013, 02:50:07 PM
so basically could just run two spartan 14point7's in the Primary O2 spots and just feed the NB inputs into the front NB inputs, and then run the widebands into the rear stock narrowbands?   thats hot...

That's what I'm asking. I know it CAN be done, but I also know it isn't recommended by the wideband manufacturers. I'm hoping for some first hand experience.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536
You'd lose all the nice diagnostic capability of the stock ECU on the narrowbands.  If it were me I'd just keep the stockers up front and run the WB's in the rear bung and rear inputs.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
Quote from: jibberjive on June 07, 2013, 03:12:59 PM
You'd lose all the nice diagnostic capability of the stock ECU on the narrowbands.  If it were me I'd just keep the stockers up front and run the WB's in the rear bung and rear inputs.

this is what i would have done except atp's great fitment on their downpipe didnt leave enough clearance between the firewall.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 04:50:31 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)