Pages: 1 [2]
Author Topic: Definition for the 06A906032DL  (Read 23870 times)
ElDominio
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #15 on: December 14, 2012, 10:36:15 PM »

I'm on the same boat... trying to figure out a way to define this darn thing...

This is my first post, too.... Is there any way I can show that I am willing to learn about this so I can receive help??? I really want to find out how to work these things...
« Last Edit: December 14, 2012, 10:42:21 PM by ElDominio » Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #16 on: December 15, 2012, 01:01:07 AM »

Open both files in a hex editor. Go to the location of a known map (use the HN damos), and then search in that area for a similar map in the DL hex. Patterns will emerge. It sounds intimidating, but it isn't as bad as you would think.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
ElDominio
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #17 on: December 16, 2012, 12:01:44 AM »

Open both files in a hex editor. Go to the location of a known map (use the HN damos), and then search in that area for a similar map in the DL hex. Patterns will emerge. It sounds intimidating, but it isn't as bad as you would think.

Thanks, I'll get to work on that soon and I'll update as soon as I get something done!
Logged
ElDominio
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #18 on: December 16, 2012, 06:32:10 PM »

Open both files in a hex editor. Go to the location of a known map (use the HN damos), and then search in that area for a similar map in the DL hex. Patterns will emerge. It sounds intimidating, but it isn't as bad as you would think.

Hot dang was that a good reccomendation!!!!! THanks a kajillion!!!!
I'm having fun finding the patterns between the ECUs hehehehe
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #19 on: December 16, 2012, 06:47:34 PM »

I'm very glad it helped. Good luck!
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
crematedaaron
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #20 on: December 21, 2012, 04:29:58 PM »

AmIdYfReAk, because I like you:



This is for 032DL SW 360227 only. There is two (or more) versions of DL out there.

Should all of these be zero'd? Or do some require a different value for unsupported?
Logged
mrgixxer6
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #21 on: January 12, 2013, 12:13:01 PM »

Hot dang was that a good reccomendation!!!!! THanks a kajillion!!!!
I'm having fun finding the patterns between the ECUs hehehehe

How did this work for you?  I'm about to start doing the same here... I do however have a question.  After reading through this thread I see there are multiple versions for th DL.  How can I be sure I'm working on the correct one?

Thanks so much
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #22 on: January 12, 2013, 02:22:28 PM »

How did this work for you?  I'm about to start doing the same here... I do however have a question.  After reading through this thread I see there are multiple versions for th DL.  How can I be sure I'm working on the correct one?

Thanks so much


There is a great and very usefull program shared inside nefmoto, called me7check.

This provides you enough info to verify which exaclty sw you have in hands and was made for reporting if present checksum errors.
It can run on cmd prompt as it is dos executable.
I ll attach it in order to use it your own.

Use it as follows and should get same results on your file:

C:\>ME7Check.exe map_AWW_06A906032DL.bin
==============================================================================
ME7Check v1.11 (c) mki, 06/2004-07/2011
Checking file map_AWW_06A906032DL.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/3/4019.20//24b/Dst03o/280800//
-> Contents of ECUID data table:
   - '0261206890'         (SSECUHN)
   - '1037360227'         (SSECUSN)
   - '06A906032DL '       (VAG part number)
   - '0003'               (VAG sw number)
   - 'MICROCHIPS TUNIN'   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *********************


Read more this forum it contains much infos.
« Last Edit: January 12, 2013, 02:25:01 PM by professor » Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)