Pages: [1]
Author Topic: 2000 A4 1.8T ATW Engine - 4B0 906 018 P - PLEASE HELP  (Read 5433 times)
gevorg23m
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: June 23, 2013, 10:39:36 PM »

Can some one please help me figure this out.

1. How do I read the stock ecu (.bin) file with nefmoto? what type of memory layout do i chose in order to fully read the ecu?
2. Which .xdf file is compatible with this (4B0 906 018 P) ECU?

I've flashed a whole bunch of s4/a6 2.7T's but its like almost impossible to find any resources for this one.

Help would really be appreciated . thank you.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: June 23, 2013, 10:50:14 PM »

Can some one please help me figure this out.

1. How do I read the stock ecu (.bin) file with nefmoto? what type of memory layout do i chose in order to fully read the ecu?
2. Which .xdf file is compatible with this (4B0 906 018 P) ECU?

I've flashed a whole bunch of s4/a6 2.7T's but its like almost impossible to find any resources for this one.

Help would really be appreciated . thank you.

Memory layout: 29F400BB
XDF: There are none posted. If you have a specific address you need, let me know. I have defined the file and have a pretty decent winOLS definition.

As for reading with nefmoto, it may not happen. Some of the narrowband 1.8 ecu's are tricky.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
deadeye419
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #2 on: April 17, 2022, 07:30:06 AM »

I have a 2001 4b0 906 018 q I have been looking for mslub and mslbas and having little luck.  I have tried all the xdf's and kp's that I can find for it none of them are the Q just the 409 906 018 part matches.  If you could help me with the address's I would be forever grateful.

Thanks
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)