Pages: [1]
Author Topic: Can't write 95040 to ecu  (Read 2324 times)
seanf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« on: November 25, 2018, 05:31:11 PM »

I keep getting a chip select error and I'm not sure how to determine the correct one to manually enter it, this ecu has given me grief since I started, k commander didn't want to pull the SKC so I ended up pulling the BIN with me7eeprom, used vag eeprom to edit it and save it and trying to flashing it with me7eeprom I get a chip select error.

ECU is 4b0907551t from 2001 A6 2.7T, Trying to turn the immo off so I can put an S4 m box file on it to run with my 2004 A4 2.7t swap.

Thanks
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)