2.0 TFSI BWJ 240 Idle Misfire

Pages: [1]

« previous next »

Author

Topic: 2.0 TFSI BWJ 240 Idle Misfire (Read 9403 times)

n0ble

Full Member

Karma: +2/-0
Offline

Offline

Posts: 192

	2.0 TFSI BWJ 240 Idle Misfire « on: June 21, 2014, 08:19:01 PM »

Hey All,

This isn't really causing me an issue, but i would like to get to the bottom of it.

The car seems to misfire on idle once left for a few minutes and misfire counter kicks in and always registers on the same cylinder.

I have had plugs and coils replaced and also swapped injectors around, the car has also had a carbon clean and still i get misfires on the same cylinder on idle... Any ideas?

I'm hoping that the rod on that piston is not very very slightly bent or something.

Thanks


	Logged

vagenwerk

Full Member

Karma: +2/-0
Offline

Offline

Posts: 182

	Re: 2.0 TFSI BWJ 240 Idle Misfire « Reply #1 on: June 22, 2014, 06:22:16 AM »

compression test ?


	Logged

n0ble

Full Member

Karma: +2/-0
Offline

Offline

Posts: 192

	Re: « Reply #2 on: June 22, 2014, 07:28:05 AM »

Full leak down/compression test has been done... All good


	Logged

vagenwerk

Full Member

Karma: +2/-0
Offline

Offline

Posts: 182

	Re: 2.0 TFSI BWJ 240 Idle Misfire « Reply #3 on: June 24, 2014, 08:00:42 AM »

what about values ?


	Logged

n0ble

Full Member

Karma: +2/-0
Offline

Offline

Posts: 192

	Re: « Reply #4 on: June 24, 2014, 02:37:10 PM »

I had them replaced with the S3 valves as original valves were causing misfires at higher rpm on higher boost due to valve float.


	Logged

adam-

Hero Member

Karma: +122/-33
Offline

Offline

Posts: 2178

	Re: 2.0 TFSI BWJ 240 Idle Misfire « Reply #5 on: June 24, 2014, 03:35:11 PM »

Does it only do it once up to temp? Tried gapping that one plug a little less? A little more dwell time on the coils, maybe?


	Logged

nokiafix

Full Member

Karma: +19/-2
Offline

Offline

Posts: 124

	Re: 2.0 TFSI BWJ 240 Idle Misfire « Reply #6 on: January 12, 2015, 12:48:58 PM »

What was the issue N0ble? I have seen this exact same issue from duff injectors which lead to a melted piston on the same cylinder when running 1.7bar at 460hp..


	Logged

majorahole

Sr. Member

Karma: +16/-4
Offline

Offline

Posts: 302

	Re: 2.0 TFSI BWJ 240 Idle Misfire « Reply #7 on: February 09, 2015, 06:59:37 PM »

+1 it could help future users too, thanks


	Logged

4ringpieces

Full Member

Karma: +4/-4
Offline

Offline

Posts: 232

	Re: 2.0 TFSI BWJ 240 Idle Misfire « Reply #8 on: February 19, 2015, 10:46:00 AM »

I've seen a couple of occurrence's where the ecu was at fault on these, swap it out with a known good one to be sure


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: 2.0 TFSI BWJ 240 Idle Misfire « Reply #9 on: February 19, 2015, 06:33:33 PM »

Why does a bent rod come to mind? Ever ingest water?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 28, 2024, 11:15:00 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search