Pages: [1]
Author Topic: specific dtc error code delete on edc17(cp14)  (Read 21591 times)
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« on: June 26, 2013, 07:35:10 AM »

deleting individual dtc codes from edc17 (cp14 was the flavor i was working with)

example:

009298 - Diesel Particle Filter; Differential Pressure Sensor
P2452 - 000 - Elect. Malfunction - MIL ON

find the p code in the p code look up table. 16bit, hex.

location: 190a7a
p code table start: 190654

get your hex calculator!

190a7a - 190654: 426. divide by 2, 213.

find your vag specific dtc look up table. 8 bit.

example:

table start location: 18569e
18569e + 213: 1858b1. this is the location of the p2452 dtc. 00 this byte.
no more dtc light.
same process as me7 except /2 instead of /8.
Logged
chli1976
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25


« Reply #1 on: June 27, 2013, 09:45:25 PM »

I have read this in other forum, do you have also this file or the softwarenumber.
I have search for this adresses in my CP14 file but i do not find it.
Logged
janne
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 50


« Reply #2 on: July 04, 2013, 05:42:27 AM »

Please remember that if you remove dpf it is not enought to delete fault codes it still regenerate and give limp to you.
If that was only examble then ok.
Thanks anyway for tell how to remove codes.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #3 on: July 04, 2013, 07:12:00 AM »

Please remember that if you remove dpf it is not enought to delete fault codes it still regenerate and give limp to you.
If that was only examble then ok.
Thanks anyway for tell how to remove codes.

dpf was removed with codewords as well.
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #4 on: July 06, 2013, 06:26:16 AM »

Sometimes it works, sometimes it doesnt. Usually VAG EDC17 has switch (2 bits) that delete regeneration also.
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #5 on: December 12, 2013, 02:00:39 PM »

Please,help me anyone with remove dtc from edc17, car is audi a4 3.0tdi 176kw CAPA engine

dtc is: 7156
         P2015
Logged
stefan3022
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #6 on: June 25, 2014, 03:00:10 PM »

hello,


How to find p-code in 16-bit hex? 02452 not found in search mode.
please help

regards




deleting individual dtc codes from edc17 (cp14 was the flavor i was working with)

example:

009298 - Diesel Particle Filter; Differential Pressure Sensor
P2452 - 000 - Elect. Malfunction - MIL ON

find the p code in the p code look up table. 16bit, hex.

location: 190a7a
p code table start: 190654

get your hex calculator!

190a7a - 190654: 426. divide by 2, 213.

find your vag specific dtc look up table. 8 bit.

example:

table start location: 18569e
18569e + 213: 1858b1. this is the location of the p2452 dtc. 00 this byte.
no more dtc light.
same process as me7 except /2 instead of /8.
Logged
sv.Konstantin
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 4


« Reply #7 on: April 15, 2017, 03:20:38 AM »

deleting individual dtc codes from edc17 (cp14 was the flavor i was working with)

example:

009298 - Diesel Particle Filter; Differential Pressure Sensor
P2452 - 000 - Elect. Malfunction - MIL ON

find the p code in the p code look up table. 16bit, hex.

location: 190a7a
p code table start: 190654

get your hex calculator!

190a7a - 190654: 426. divide by 2, 213.

find your vag specific dtc look up table. 8 bit.

example:

table start location: 18569e
18569e + 213: 1858b1. this is the location of the p2452 dtc. 00 this byte.
no more dtc light.
same process as me7 except /2 instead of /8.
Logged
John First
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #8 on: February 12, 2018, 04:24:52 AM »

deleting individual dtc codes from edc17 (cp14 was the flavor i was working with)

example:

009298 - Diesel Particle Filter; Differential Pressure Sensor
P2452 - 000 - Elect. Malfunction - MIL ON

find the p code in the p code look up table. 16bit, hex.

location: 190a7a
p code table start: 190654

get your hex calculator!

190a7a - 190654: 426. divide by 2, 213.

find your vag specific dtc look up table. 8 bit.

example:

table start location: 18569e
18569e + 213: 1858b1. this is the location of the p2452 dtc. 00 this byte.
no more dtc light.
same process as me7 except /2 instead of /8.
Good afternoon, tell me, the beginning of 190654 and what size of the table? The number of columns and rows? What algorithm of error removal, what else cards are needed (VAG DTC, DTC Class), what addresses? What cards are you still aware of in this file?
I still only know VAG EDC16.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)