Bench flashing set up done!
![](https://lh3.googleusercontent.com/-LMXeCsExh8s/UdyuCJrHlRI/AAAAAAAAONA/WW-2sObIRAU/w1103-h827-no/20130709_204222_LLS.jpg)
Cleaned up:
![](https://lh6.googleusercontent.com/-xSEKDNR615s/UdyvuIyyoMI/AAAAAAAAONk/EL1KovpbzbQ/w1103-h827-no/20130709_204937.jpg)
Communicating with VCDS
![](https://lh6.googleusercontent.com/-VZUvIOpgRmA/Udy4UYkNhQI/AAAAAAAAON8/8CBbTy_sF-k/w1103-h827-no/20130709_212618.jpg)
Communicating with NefMoto:
![](https://lh4.googleusercontent.com/-HCsd98Lb8BM/Udy7GyzfxsI/AAAAAAAAOOo/TrZsYCoqVEc/w1103-h827-no/20130709_213747.jpg)
Now its time to learn how to flash!!
Any step-by-step guides out there?
End goal:
IMMO defeat
Manual trans
No egr
No rear o2
No evap
Any tuning flash, if its available. Will be running 2.5" manifold back exhaust, high flow cats.