Pages: [1]
Author Topic: Engine Load Requisted problem  (Read 8141 times)
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« on: July 05, 2013, 06:30:46 PM »

Hi , I`m missing something because my Engine Load Requisted rsol_w is capping to 160 but I`m asking for 180.

Here`s is my curent file with the def file and some log that I just did.

Can some one help me with a possible solution
« Last Edit: July 06, 2013, 10:14:46 AM by dnenov7 » Logged
krazydbiker
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 202


« Reply #1 on: July 05, 2013, 08:35:06 PM »

KFLDHBN?
Logged
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #2 on: July 05, 2013, 09:40:57 PM »

KFLDHBN?

I`ll give it a shot tomorrow morning. Thank you Smiley
Logged
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #3 on: July 06, 2013, 06:06:34 AM »

I`ll give it a shot tomorrow morning. Thank you Smiley

Well just made another log and now the Requested Boost is at 2200mbar but the actual is at the same maximum ~2000mbar , you can see it in the new log at 246 sec. Any help ?

I dont have any boost leek and i`m using a bigger k04 turbo , shouldnt have a problem to hold this pressur.

tnx
Logged
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #4 on: July 06, 2013, 06:38:51 AM »

I tried to bump I-term , ldrxn , kfmiop , kfmirl torque monitor is not interventing and the actual boost still doesn't go beyond ~ 2000mbar I`m missing something BIG Huh

« Last Edit: July 07, 2013, 07:07:39 AM by dnenov7 » Logged
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #5 on: July 07, 2013, 07:18:46 AM »

^ UP
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #6 on: July 07, 2013, 07:42:50 AM »

log from 3rd at low rpm till limiter at wot
Logged

VAG cars newbie tuner Smiley
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #7 on: July 07, 2013, 07:52:18 AM »

log from 3rd at low rpm till limiter at wot

all my pulls are in 3rd and shifting 4th , only the last pull in the last log was in 5th to about 4000rpm and then the boost is ~2050
« Last Edit: July 07, 2013, 07:55:06 AM by dnenov7 » Logged
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #8 on: July 09, 2013, 07:25:23 AM »

no one has any idea ?
Logged
phila_dot
Hero Member
*****

Karma: +172/-11
Offline Offline

Posts: 1709


« Reply #9 on: July 09, 2013, 08:05:33 AM »

Just breezed through and haven't looked at the logs or anything.

The issue is boost not meeting requested?

If so, stop randomly touching unrelated maps.

Is the throttle wide open?

What's WGDC doing?

It sounds like KFLDIMX or KFLDRL just based on the small amount of information provided.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #10 on: July 09, 2013, 08:27:03 AM »

Log wgdc, and stop futzing around with short pulls.

Log 3rd from 2500 WOT through redline.
« Last Edit: July 09, 2013, 08:29:56 AM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #11 on: July 13, 2013, 09:57:53 AM »

Log wgdc, and stop futzing around with short pulls.

Log 3rd from 2500 WOT through redline.

Problem solved , clogged cat Smiley now it's boosting good.

But have to fix a low g/s reading and after I'm done.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 16 queries. (Pretty URLs adds 0s, 0q)