Pages: [1]
Author Topic: Opel ME7.6.2 hard rev limiter tips and help  (Read 3010 times)
kirukisu
Jr. Member
**

Karma: +1/-3
Offline Offline

Posts: 25


« on: September 21, 2019, 02:00:53 AM »

Hi, i'm struggling to set hard cut pops and bangs on a Astra H 2.0 leh. I have been following s4wiki but there are some differences.
Here is what i've done
There is no KFSTRL in opel file so i use KFSZT to cut spark, here is how it looks

Instead FTOMN i use FUBAOF (which is the same i think)and it is set to 0
NMAX is set to 6200 and DNMAXH 400 rpm(already tried to twaek it from 50 rpm up)
There are flames and bangs but only when i do wot to 6k rpm and then let go gas pedal back and forth to the redline. (dunno if i did express myself correctly)
Innovate shows afr beeing 15++ so there is no fuel for bangs, also no significant boost build when rev to the redline. In my ZUESZ folder i  see no other relevant maps i sould alter to get what i want. Maybe someone could help me with that thanks. I've been working with diesel cars mostly but now i want to try gasoline.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)