Pages: [1]
Author Topic: MAF pegged at 327.5  (Read 8046 times)
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« on: March 05, 2011, 06:59:15 AM »

Below is a log from  VCDS.  My MAF is pegging at 327.5  Does this look right?   Wiki suggests 335.  You can also see that my load, and hence boost, is oscillating slightly.  Now this could well be a PID issue, but it could also be something that is capping the max load at 191, and the airflow at 327.  Overboost and Pressure ratio maps are now FF'd out.  Map for diagnosing max airflow limit has been adjusted to 400g/s.  Thoughts?


TIME         RPM          PW            MAF
650.82   4000   185   11.22   214.97
651.22   4240   182   10.88   225.5
651.64   4560   181.2   10.88   242.58
652.07   4840   185.7   11.22   265.08
652.5   5120   185   11.22   290.06
652.97   5440   191.7   11.56   325.94
653.43   5760   185.7   11.22   320.97
653.91   6040   182   10.88   327.5
654.41   6320   191.7   11.56   327.5
654.92   6600   190.2   11.56   327.5
655.41   6840   185   11.22   327.5
655.93   7120   177.4   10.88   327.5
656.42   7320   107.5   6.46   190.17
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #1 on: March 05, 2011, 02:13:36 PM »

You could be hitting the max corrected specified load limit - KFMIRL.
« Last Edit: March 05, 2011, 02:21:36 PM by Tony@NefMoto » Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #2 on: March 05, 2011, 10:28:57 PM »

KFMIRL is the master desired load map, so not sure how it could be a limit.  It's set at 210 which is around 1.4 bar boost.  Load is pegged at 190.  Im thinking this is VCDS limit?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: March 06, 2011, 02:36:54 PM »

Im thinking this is VCDS limit?

Its been a long, long time since I used vcds to log MAF, but I think you might be right on this.. unlike the MAP limit, the VCDS limit seems to be lower than what the max (internal cpu represented) MAF data value is, which can be read properly by ECUx, since it reads memory locations directly.

Unfortunately, I don't recall the specifics
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #4 on: March 06, 2011, 03:45:44 PM »

Never been able to find a working copy of ECUX Sad
Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152


« Reply #5 on: March 06, 2011, 05:04:49 PM »

Do you know anyone that has it?
« Last Edit: March 11, 2011, 01:08:23 AM by zillarob » Logged
s4rmm
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 28


« Reply #6 on: March 07, 2011, 02:21:37 AM »

Im thinking this is VCDS limit?
VCDS limit is 364.08 g/s
Logged
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #7 on: March 07, 2011, 03:55:39 AM »

I have a copy of it, which I can get to run after I changed my hardware ID, however it won't allow me to start a new project, keeps giving an  error message.

Rick
Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152


« Reply #8 on: March 10, 2011, 11:02:43 PM »

You get my PM rick?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)