Pages: 1 ... 7 8 [9]
Author Topic: ME7Check: Checksum checker for ME7  (Read 228761 times)
FreeRideSkier
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #120 on: June 02, 2016, 11:19:30 AM »

Works fine on Win10 64bit!

Use the Windows+R key to get the Run dialogue box, then enter CMD to open the command window.

Then navigate to your folder using :

cd C:\Users\myname\Documents\myfolder


To run type ME7Check.exe follwed by your .bin file name:

C:\Users\myname\Documents\myfolder>ME7Check.exe mybinapx.bin

The report should look like this:

==============================================================================
ME7Check v1.08 (c) mki, 06/2004-04/2011
Checking file mybinapx.bin (size=524288)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 42/1/ME7.5/5/4018.10//F19x6/Dst02o/101299/
-> Contents of ECUID data table:
   - '0261206797'         (SSECUHN)
   - '1037354094'         (SSECUSN)
   - '8L0906018N  '       (VAG part number)
   - '0002'               (VAG sw number)
   - '1.8L R4/5VT         '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *********************

I hope this helps...
Logged
SteveAR
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 103


« Reply #121 on: February 20, 2017, 04:56:50 PM »

Is this tool designed to check CS's in any BIN file?   I just used some of the other tools available on this site to download BIN/image from my EEPROM.   I used this checker tool on both a un-touched version of this BIN and a VIN-modified version of the BIN. Then on another stock EEPROM dump BIN.  I got errors (xxx.bin has not correct length 0x200 and 0x400.  expecting 0x80000 and 0x100000)     The tool (94050tool) has CS correction built in, but I was just trying to see if it had worked.  Is this tool only meant for the main flash? (not sure the correct term for it)  I'm guessing based on the memory sizes it was expecting to see it's only for CS correction on the main flash.
Thanks!
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #122 on: February 20, 2017, 05:30:45 PM »

Yes. Main flash, not EEPROM.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226


« Reply #123 on: April 18, 2017, 04:27:17 PM »

Hello... after do a Me7Check, and Me7sum with 9/9 error corrected ... i re-check the file and it says Romsys checksum error... if i re-sum the checksummed file the error disappear...but...is it correct ? The car will start up ? Or i need to find another way to check and sum ?

These are the screens:
Logged
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226


« Reply #124 on: April 18, 2017, 04:31:43 PM »

This is the file checksummed the second time and re-checked... seems be all fine...but is it safe ? Smiley
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #125 on: April 18, 2017, 09:18:09 PM »

https://github.com/nyetwurk/ME7Sum/issues/7
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226


« Reply #126 on: April 19, 2017, 12:42:50 AM »


So this means :
Quote
Checksum corrections that affect previously checked areas do not cause the previously checked area to be checksummed again.

Work around is to run ME7Sum two or more times (iteratively) on successive "fixed" files.

It's right what i have done... i can use the file in securely Smiley

Thank you very much Nyet.
« Last Edit: January 13, 2019, 09:23:16 PM by nyet » Logged
323toslow
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #127 on: January 12, 2019, 04:01:52 PM »

I know this is an old thread but I am hoping someone could help me clarify a couple of things.
I am working on a TunerPro definition for my ecu (‘04 Passat AWM).

What is the line EPK in me7check all about, what does it mean?
In me7check, is SSECUHN & SSECUSN just the bosch “acronym” for hardware number and serial number?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #128 on: January 13, 2019, 09:24:04 PM »

I know this is an old thread but I am hoping someone could help me clarify a couple of things.
I am working on a TunerPro definition for my ecu (‘04 Passat AWM).

What is the line EPK in me7check all about, what does it mean?
In me7check, is SSECUHN & SSECUSN just the bosch “acronym” for hardware number and serial number?

Hint
SSECUHN & SSECUSN
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
323toslow
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #129 on: January 15, 2019, 10:06:52 AM »

Hint
SSECUHN & SSECUSN
Got it.
Any chance you would hint at what the values after EPK are all about?
Logged
Pages: 1 ... 7 8 [9]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)