Pages: 1 [2]
Author Topic: Full Read - Car Won't Start (2004 2.7TQM A6)  (Read 10025 times)
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #15 on: August 08, 2014, 05:52:25 AM »

Additionally, if you save the eeprom BEFORE attempting a read, then write it back when you're done you won't have this issue either Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #16 on: August 08, 2014, 08:31:02 AM »

dd- does this issue come up much? IS this something that should be added to the FAQ? I always thought reading was safe...
Logged
ddillenger
Hero Member
*****

Karma: +639/-21
Offline Offline

Posts: 5640


« Reply #17 on: August 08, 2014, 08:47:40 AM »

The only cars it kills are the 03-05 allroad/a6. The other vehicles still start and run, just have the code from what I've seen. There is a sticky with the warning, but it can't hurt.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #18 on: August 08, 2014, 08:51:57 AM »

I had it fail to exit properly on a B6 A4 1.8t AMB. It read the full file and then left the "programming not finished" Code. Car would just crank, no MIL illuminated. I emailed you about it I think.

I then just flashed the same file I read and it fired right back up. Guess it only happens during reads?
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 424


« Reply #19 on: August 08, 2014, 10:39:41 AM »

Even CMD has this issue as I know. MPPS has the same problem also. So Nefmoto flasher, FGtech, CMD, MPPS.
I've never read tuners had "programming not finished" on other ECUs, only VAG ME7.
But this is not a big problem, after reflashing via OBD everything is fine. Boot doesnt work in this case, but if you dont want this DTC, use boot all the time.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)