Trouble flashing 4Z7907551L Allroad ecu.

Pages: [1]

« previous next »

Author

Topic: Trouble flashing 4Z7907551L Allroad ecu. (Read 7682 times)

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Trouble flashing 4Z7907551L Allroad ecu. « on: September 18, 2013, 07:27:18 PM »

I have am trying to bench flash an 01 allroad manual ecu. I am using the same bench harness I have used dozens of times before, but with this one I am getting the immobolizer is not authenticated message. I have voltage supplied to pin 21. Does it need the resistor? I thought it just needed power to that pin. Thanks all


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Trouble flashing 4Z7907551L Allroad ecu. « Reply #1 on: September 18, 2013, 07:38:42 PM »

Did you disable the immobilizer? If not, that's your problem.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Re: Trouble flashing 4Z7907551L Allroad ecu. « Reply #2 on: September 18, 2013, 07:48:44 PM »

Thought I could still bench flash, but provide 12v to pin 21. No? Guess I gotta try to bench flash immo off.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Trouble flashing 4Z7907551L Allroad ecu. « Reply #3 on: September 18, 2013, 07:57:05 PM »

You must disable the immobilizer to bench flash an immobilizer equipped ecu.


	Logged

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Re: Trouble flashing 4Z7907551L Allroad ecu. « Reply #4 on: September 18, 2013, 08:09:52 PM »

Do you by chance have the picture of which pin to ground when trying to boot mode an allroad ecu with the infineon processors. Can't seem to find it.


	Logged

stuklr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 147

	Re: Trouble flashing 4Z7907551L Allroad ecu. « Reply #5 on: September 18, 2013, 08:20:06 PM »

Nevermind, I am a dummy. Found it. Flashing immo off file. Thanks.


	Logged

MyTunes

Full Member

Karma: +9/-5
Offline

Offline

Posts: 83

	Re: Trouble flashing 4Z7907551L Allroad ecu. « Reply #6 on: October 01, 2013, 07:23:21 PM »

I've been able to bench flash these ecu's by doing the ground pin trick while powering them up.

My galleto clone works like 10-15% while mpps works everytime.

Who knows LOL


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 09:35:49 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search