NefMoto > Technical > Tuning > Lamfa - 018H
Pages: [1]
« previous next »
Author Topic: Lamfa - 018H  (Read 8260 times)
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401
« on: September 30, 2013, 05:14:15 AM »
Hi

Edited the LAMFA axis for my TT 018 H 004 ECU.

Does it look right?   I had a issue with it editing the map data when changing the pedal position axis, so managed to transfer map over from a 018 CB ols with the correct offset.


Is it right? 

Thanks

Chris
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401
« Reply #1 on: September 30, 2013, 05:16:06 AM »
Actually looking over it thats going to give  0.95 lamda up until 60% pedal then drop to lambda 1.

Should the 0.95 go all way up to 90% then tune the 100% axis to the correct AFR i want to set?
Logged
panos1975
Full Member
***

Karma: +7/-6
Offline Offline

Posts: 105
« Reply #2 on: September 30, 2013, 05:29:41 AM »
I think you have to correct map offset and pedal axis( 50-100)and enrich the two last pedal axis.This is only my opinion, newbbie here.
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401
« Reply #3 on: September 30, 2013, 05:32:02 AM »
snap with the newbie lol.

Now have this.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #4 on: September 30, 2013, 07:01:16 AM »
Looks like lamfa is defined incorrectly in your file.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401
« Reply #5 on: September 30, 2013, 06:40:50 PM »
Sure it was from the one you dropped me the other week.
Logged
20VTMK1
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 113
« Reply #6 on: October 02, 2013, 01:46:37 PM »
In the 018 CB OLS lamfa is wrong , there is an issue with the % axis as well as the map start position if memory serves me correct . I can help you with 018BQ

Offset for map is 0.114851 , 6 x 15 map
Starts at 1CD9C .

Shout out if you need more info
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #7 on: October 03, 2013, 12:33:14 AM »
Quote from: 20VTMK1 on October 02, 2013, 01:46:37 PM
In the 018 CB OLS lamfa is wrong , there is an issue with the % axis as well as the map start position if memory serves me correct . I can help you with 018BQ

Offset for map is 0.114851 , 6 x 15 map
Starts at 1CD9C .

Shout out if you need more info

Map 0x1c98e

Conversion 0.007813

Rpm 0x1c972
8bit
Conversion 40

Pedal 0c1c982
16bit
Conversion 0.003052
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401
« Reply #8 on: October 03, 2013, 05:12:50 AM »
Quote from: littco on October 03, 2013, 12:33:14 AM
Map 0x1c98e

Conversion 0.007813

Rpm 0x1c972
8bit
Conversion 40

Pedal 0c1c982
16bit
Conversion 0.003052



Legendry thanks Smiley

Managed to put that in a 018CB file and transfer the map over to the 018H after matching the hexdumps up.  NOw scale goes, 50, 60, 70, 85, 99, 100% on the RPMs with the lambda last row on the list Smiley

Cheers!
Logged
20VTMK1
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 113
« Reply #9 on: October 03, 2013, 12:17:55 PM »
Sorry mate ,

I see my modified post didn't show . I put up the info for the CB file ..

Apologies
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 15, 2024, 02:46:22 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)