NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Me7.5 immo defeat without boot mode trough obd
Pages: [1]
« previous next »
Author Topic: Me7.5 immo defeat without boot mode trough obd  (Read 13717 times)
volksdude
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 16
« on: October 01, 2013, 05:01:12 AM »
Ok here's my problem. Got a 2.0 turbo ME7.5 ecu here from a "big tuner " wich I need to immo defeat. However I had the bad surprise of finding goop on all chips on the board. ( I kind of understand why there is goop on chips where I could syphon the flash but on the 95040?? Really?? Whats the point? )

So I'm wondering if there's a way to immo defeat that damn ecu trough OBD without sending it in boot mode. Or if there is a pin on ecu connector that can send the ecu in biot mode so I can use the program available here to immo defeat it... Or in last resort a way to remove the goop without damaging the chip.
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246
« Reply #1 on: October 01, 2013, 05:17:06 AM »
You can use a tool like VAG Commander, or Vagdashcom/Vagdashcan.
This tool not require boot mode.
Logged
hammersword
Full Member
***

Karma: +31/-2
Offline Offline

Posts: 136

Revlimit ECU tuning


WWW
« Reply #2 on: October 01, 2013, 05:27:06 AM »
I use VAG ECU tool
Logged
www.revlimit.gr
The Motronic Specialists....
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447
« Reply #3 on: October 01, 2013, 06:19:46 PM »
Depending on what big tuner this may not work anyhow.
I know GAIC has a really weird 95040 file.
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353
« Reply #4 on: October 02, 2013, 01:21:42 AM »
You mean GIAC ? APR and Revo too...

to OP , what is this 2.0 Turbo with ME7.5 ?!?!?
Logged
VAG cars newbie tuner Smiley
volksdude
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 16
« Reply #5 on: October 02, 2013, 06:00:01 AM »
Quote from: TCSTigersClaw on October 02, 2013, 01:21:42 AM
You mean GIAC ? APR and Revo too...

to OP , what is this 2.0 Turbo with ME7.5 ?!?!?

2.0 8v. I managed to find an alternative onnthe board to ground the pin for bootmode. As for the file I just flashed the immo off file to avoid hassles
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #6 on: October 02, 2013, 04:26:19 PM »
I have tried to immo off a GIAC ecu with VagDashCan and it wouldn't save it to the 95040.
The 95040 was pretty standard at least in terms of the immo off locations.
But I could not get it to save and being ME7.1.1 I couldn't get it into boot mode.
I have lots of trouble with those and boot mode.
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #7 on: October 02, 2013, 04:32:30 PM »
f1torrents:

I gave up on doing those without a hot air station.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #8 on: October 03, 2013, 06:55:13 PM »
giac's (and others) tunes are tied to the 95040 contents.  you must dump the original 95040 contents and manually change the 2 hex values and checksums while leaving the rest stock and reflashing it.
« Last Edit: October 03, 2013, 09:05:51 PM by coreyj03 » Logged
volksdude
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 16
« Reply #9 on: October 04, 2013, 08:11:07 AM »
Quote from: coreyj03 on October 03, 2013, 06:55:13 PM
giac's (and others) tunes are tied to the 95040 contents.  you must dump the original 95040 contents and manually change the 2 hex values and checksums while leaving the rest stock and reflashing it.


Well if thats the case I'll have a look at the original bin i read before flashing the immo off file.

On another note, can someone explain me why they gooped the 95040 ?? Is there any vital info to get from there? ( other than what you just explained about the immo file tied to the flash )
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #10 on: October 04, 2013, 09:35:39 AM »
That's the exact reason.
So you can't IMMO off it easily and take it to another car.
You must use the original 95040 to retain the tune.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 03:08:35 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.043 seconds with 17 queries. (Pretty URLs adds 0s, 0q)