Pages: [1] 2 3 ... 8
Author Topic: Easily scale your MAF for larger housings! (now with 50 percent more hitachi!)  (Read 73387 times)
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246



This should allow for a fairly close rough scale for bosch sensors in larger housings. Some fine tuning may be required, but so far the results look promising. You can specify the offset of MLHFM, or allow the program to find it automatically. When specifying the offset, make sure to follow this format:

0x[MLHFM offset]

Please, check the results before flashing, and report any problems or observations.

MAFadjust for Bosch sensors, by maZer.GTi and ddillenger

Notes:
- Fixed 16bit overshoot bug
-Fixed Hitachi bug, now results for hitachi should be ok
-New Version will write create txt file for copy and pasting into winols or tunerpro
-Please remember to correct the checksums prior to flashing.
-Failing to specify an offset for your MAF transfer function
 will result in an automated search. Please verify results prior to flashing.
-When specifying a percentage scale,
 use the change in surface area, NOT diameter.
-Unless specified, calculations are for Bosch sensors.
 For Hitachi, please remember to specify that in your command.

Usage: mafadjust [yourfile].bin [old_diameter] [new_diameter] [0xMLHFM_offset]
Usage: mafadjust [yourfile].bin [increase_diameter_percent] [MLHFM_offset]
Usage: mafadjust [yourfile].bin [old_diameter] [new_diameter] hitachi

Usage examples:

-- 73mm MAF scaled for 83mm housing
mafadjust 8D0907551A.bin 73 83

-- 73mm MAF scaled for 83mm housing, MLHFM @ 0x10D72
mafadjust 8D0907551A.bin 73 83 0x10D72

-- 73mm Hitachi MAF scaled for 83mm housing, MLHFM @ 0x10D72
mafadjust 8D0907551A.bin 73 83 0x10D72 hitachi

-- MAF scaled for 30% larger housing, MLHFM @ 0x10D72
mafadjust 8D0907551A.bin 30 0x10D72


Have fun, please post here with any feedback or suggestions Smiley
« Last Edit: December 11, 2014, 08:00:36 PM by maZer.GTi » Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #1 on: October 20, 2013, 04:35:06 PM »

thanks
it worked

result is very close to mine (rescaling by crosssection + calibrating by logs)
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246


« Reply #2 on: October 20, 2013, 04:36:06 PM »

thanks
it worked

result is very close to mine (rescaling by crosssection + calibrating by logs)

Big thanks for your feedback Cheesy
If you have some tips to make this tool better just let me know Smiley
Logged
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763


« Reply #3 on: October 20, 2013, 06:00:28 PM »

Big thanks for your feedback Cheesy
If you have some tips to make this tool better just let me know Smiley


Works great! Do the numbers represent I.D.?

Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #4 on: October 20, 2013, 07:53:39 PM »

Very cool!  But is there a reason why this is for the Bosch MAF sensor only and not the Hitachi?

Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #5 on: October 20, 2013, 08:02:56 PM »

Lot more Bosch sensors in use than Hitachi. That, and Hitachi isn't as difficult to do manually.

It'll be added though. Bosch just took priority due to the difficulty in calculating the areas of reverse flow.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
masterj
Hero Member
*****

Karma: +61/-5
Offline Offline

Posts: 1049



WWW
« Reply #6 on: October 20, 2013, 11:13:50 PM »

Very cool, Andreas! Smiley
Logged

TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #7 on: October 20, 2013, 11:32:07 PM »

thanks! I will try as soon as possible Smiley
Logged

VAG cars newbie tuner Smiley
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763


« Reply #8 on: October 20, 2013, 11:50:13 PM »


Do the numbers represent I.D.?



The reason I ask is because my ori MAF housing has an O.D. of 70.12mm on my digi caliper. I have a 225 MAF housing with an I.D. of 69.92 mm with an O.D. of 79.82mm so I'm a bit confused.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #9 on: October 21, 2013, 12:12:28 AM »

All measurements are ID.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246


« Reply #10 on: October 21, 2013, 06:53:53 AM »

Very cool, Andreas! Smiley

Thanks Cheesy
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #11 on: October 22, 2013, 01:28:00 PM »

Lot more Bosch sensors in use than Hitachi. That, and Hitachi isn't as difficult to do manually.

It'll be added though. Bosch just took priority due to the difficulty in calculating the areas of reverse flow.

Very cool!  Thx
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #12 on: October 22, 2013, 02:43:47 PM »

Mazer did the heavy lifting.

 Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219



I'm not as computer literate as most on here but application seems to pop up for a second then disappear. Not sure how to run this type of file.
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM



run itfrom command promt (WIN+R > "cmd")
Logged
Pages: [1] 2 3 ... 8
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 18 queries. (Pretty URLs adds 0s, 0q)