NefMoto > Technical > Tuning > Help: Polo 1.6TDi tuning
Pages: [1]
« previous next »
Author Topic: Help: Polo 1.6TDi tuning  (Read 7034 times)
P.A.T.
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 15
« on: December 11, 2013, 09:01:42 PM »
Hi guys,

I need some help and guidance for tuning a 2012 VW Polo 1.6 TDi. This will be the first one I do. I do have original CMD -master , ByteShooter-semi slave and MPPS - master. I don't have tri-core.

Any ideas.

Thank you.
PAT
Logged
RS-MAD
Jr. Member
**

Karma: +3/-1
Offline Offline

Posts: 46
« Reply #1 on: December 12, 2013, 12:52:44 AM »
Quote from: P.A.T. on December 11, 2013, 09:01:42 PM
Hi guys,

I need some help and guidance for tuning a 2012 VW Polo 1.6 TDi. This will be the first one I do. I do have original CMD -master , ByteShooter-semi slave and MPPS - master. I don't have tri-core.

Any ideas.

Thank you.
PAT

ECU must be Continental PCR , so you need to open and unlock OBD read/write if your ECU is locked . When unlocked read/write OBD is easy .
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041
« Reply #2 on: December 12, 2013, 01:34:17 AM »
Correct, your tool must support boot mode unlock. Some resistors will need soldering or if your tool has a special head for PCR then it is even easier.
After EEPROM is altered in boot, it is possible to write via OBD.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
P.A.T.
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 15
« Reply #3 on: December 12, 2013, 08:45:30 AM »
Hi Guys,

Thank you.
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425
« Reply #4 on: December 12, 2013, 12:01:48 PM »
If you dont have tricore plugin you cant read read it, cause first you should open ECU and unlock it
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041
« Reply #5 on: December 18, 2013, 08:42:42 AM »
Quote from: terminator on December 12, 2013, 12:01:48 PM
If you dont have tricore plugin you cant read read it, cause first you should open ECU and unlock it


Actually you can read without unlocking.
The reason the unlock is needed is to flash unsigned code.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
manfred
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12
« Reply #6 on: December 18, 2013, 02:11:02 PM »
Quote
Actually you can read without unlocking.
The reason the unlock is needed is to flash unsigned code.

with which tool?
I always must open first time ECU
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425
« Reply #7 on: December 18, 2013, 04:19:38 PM »
I think he mean you can read it without unlocking, but you cant write it.
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6041
« Reply #8 on: December 20, 2013, 08:02:14 AM »
Quote from: terminator on December 18, 2013, 04:19:38 PM
I think he mean you can read it without unlocking, but you cant write it.

Yes, exactly. You can read without unlocking, unlock is needed to flash a file that is not digitally signed by the manufacturer.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
manfred
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12
« Reply #9 on: December 25, 2013, 01:37:53 AM »
All right, thanks i it will test
Logged
yosh
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 22
« Reply #10 on: January 04, 2014, 06:36:25 AM »
Correct, thereafter OBD write
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 06:17:48 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0s, 0q)