NefMoto > Technical > Tuning > Tuning KFMSNWDK and KFWDKMSN
Pages: [1]
« previous next »
Author Topic: Tuning KFMSNWDK and KFWDKMSN  (Read 11950 times)
robbyrr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« on: December 17, 2013, 02:31:28 AM »
When installing different throttle body and/or bigger intake manifold these have to be tuned(amongst several other maps), but what is the right way to tune them?

-the values of KFMSNWDK are kg/hr so do i just log the kg/hr from the maf at all the pedal positions vs rpm and fill in the results?

-i also have an r32 throttle body,is it ok to take the KFWDKMSN of the r32 file? or do i have to manually do it like mentioned before?

Also they are inverse,in which way inverse?

Thanks!

i have me7.5 032HR
« Last Edit: December 17, 2013, 01:19:01 PM by robbyrr » Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #1 on: December 17, 2013, 12:46:40 PM »
Quote from: robbyrr on December 17, 2013, 02:31:28 AM
When installing different throttle body and/or bigger intake manifold these have to be tuned(amongst several other maps), but what is the right way to tune them?

-the values of KLAF are kg/hr so do i just log the kg/hr from the maf at all the pedal positions vs rpm and fill in the results?

-i also have an r32 throttle body,is it ok to take the KFWDKMSN of the r32 file? or do i have to manually do it like mentioned before?

Also they are inverse,in which way inverse?

Thanks!

i have me7.5 032HR

I'm just about to do the same thing, I've got an r32 map to copy the throttle maps over, once I've seen what it's like on the current map..
Logged
robbyrr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« Reply #2 on: December 17, 2013, 01:16:59 PM »
after reading some more i noticed i substituded KLAF for KFMSNWDK .. Roll Eyes

Do you have KFMSNWDK from a R32? Would be great if your willing to share it with me Grin
« Last Edit: December 17, 2013, 01:26:45 PM by robbyrr » Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #3 on: December 17, 2013, 01:26:56 PM »
I wouldn't start with R32 values. Been my experience that doing this has always made for more work.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
robbyrr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« Reply #4 on: December 17, 2013, 01:33:04 PM »
Quote from: ddillenger on December 17, 2013, 01:26:56 PM
I wouldn't start with R32 values. Been my experience that doing this has always made for more work.

What kind of mork work? the values were way off?
hmm..what would be the next best thing ?..log the kg/hr values at the various rpm and throttle position ? or multiply the values by the increase in diameter(throttle plate)

im really a noob with these maps
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640
« Reply #5 on: December 17, 2013, 04:10:03 PM »
Log measured airflow, as well as calculated airflow over the throttle plate. Then adjust until it lines up. It's easier than it sounds, might take 2 or 3 flashes to get it perfect.
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
robbyrr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16
« Reply #6 on: December 18, 2013, 03:49:47 AM »
Quote from: ddillenger on December 17, 2013, 04:10:03 PM
Log measured airflow, as well as calculated airflow over the throttle plate. Then adjust until it lines up. It's easier than it sounds, might take 2 or 3 flashes to get it perfect.

Makes sense,thanks for the tip!
Logged
PureDope
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #7 on: March 08, 2014, 03:11:59 PM »
I'm wondering how to tune this on ME9.  As far as I know I can't log calculated airflow, only what is measured by the MAF.  Can I just log these values and adjust Alpha-N (KLAF) accordingly? 
Logged
catbed
Sr. Member
****

Karma: +8/-2
Offline Offline

Posts: 300
« Reply #8 on: March 09, 2014, 11:27:53 PM »
Quote from: PureDope on March 08, 2014, 03:11:59 PM
I'm wondering how to tune this on ME9.  As far as I know I can't log calculated airflow, only what is measured by the MAF.  Can I just log these values and adjust Alpha-N (KLAF) accordingly? 

Alpha-N is not KLAF. But yes, log measured airflow and throttle plate and massage KFMSNWDK and WDKMSN maps to suit. Winlogger helps out nicely here
Logged
PureDope
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #9 on: March 10, 2014, 08:53:08 AM »
Quote from: catbed on March 09, 2014, 11:27:53 PM
Alpha-N is not KLAF. But yes, log measured airflow and throttle plate and massage KFMSNWDK and WDKMSN maps to suit. Winlogger helps out nicely here

Im using Eurodyne Maestro so its sometimes difficult to figure out the naming. Thank you for that clarification. That program also does have a very nice feature that Im guessing is similar to Winlogger, which makes it very easy to match logs up with certain maps.

I've revised it once and DSG shifts are a lot less jerky. Im just hesitant to map the exact numbers Im reading on my logs because theres such a big difference from the "base file".
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 05:12:14 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.036 seconds with 16 queries. (Pretty URLs adds 0s, 0q)