Pages: [1]
Author Topic: Tuning my 1.8T problems....  (Read 1710 times)
LynixGO
Jr. Member
**

Karma: +0/-6
Offline Offline

Posts: 49



« on: August 21, 2022, 11:22:07 AM »

Hello!!

Im trying to tune the car myself.
it is running 1.3 bar now
unfortunately the car is pulling timing.
its around 1 to 6 degrees
after WOT it instantly will go in limp mode
the intake temp is fine

i tried to change KFZW + KFZWOP
but im at my limit now im almost down to 0 timing

specs:

1.8T AWP with 334.xxx km's on the clock
upgraded fuel pump + 4 bar fpr
Audi S3 MAF + Injectors
FMIC + OVERSIZED TIP
K04-001 with upgraded actuator
RED TOPS NGK + NGK BKR7E stock gap

im thinking the high kilometers on the car has something to do with it

Things i tried:
Cleaning intake + check for vac/boost leaks
Cleaning throttle body
Replaced Knock Sensors (Torqued to 20nm)

I hope someone can give me some tips

see log + ECU file
Below
Logged

I hope you have a nice day! Cheesy
nyet
Administrator
Hero Member
*****

Karma: +605/-168
Offline Offline

Posts: 12243


WWW
« Reply #1 on: August 21, 2022, 01:54:24 PM »

Please obey forum rules.

https://nefariousmotorsports.com/forum/index.php?topic=12361.0title=
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
denniss112
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 114


Audi TT 99' | 180+HP FWD


« Reply #2 on: August 21, 2022, 03:52:45 PM »

Sounds like you didnt go thru the s4wiki.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.04 seconds with 17 queries. (Pretty URLs adds 0s, 0q)