Pages: [1]
Author Topic: Opel z20ler/leh  (Read 8964 times)
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« on: January 20, 2014, 06:31:42 PM »

Hello
could you help me ?
find correct offset a2l file z20ler file ??
starting point search MLHFM map ..
i try import winols a2l file but failed:(
and after find correct offset possible transfer maps z20leh file ?
because same map but different address

thanks
sorry my english not very good Sad

 
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #1 on: January 21, 2014, 12:51:32 AM »

You need to learn Winols better.   You can join the windows together of two bins this let's you play with Offsets and transfer maps.   :-)
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #2 on: January 21, 2014, 04:29:50 AM »

You need to learn Winols better.   You can join the windows together of two bins this let's you play with Offsets and transfer maps.   :-)

ok but first need correct import a2l file
there is no complete definition /ols/ file
a2l import need correct offset
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #3 on: January 21, 2014, 06:56:38 AM »

So you don't have the bin for the A2L file?
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #4 on: January 21, 2014, 01:03:35 PM »

So you don't have the bin for the A2L file?
attached z20ler and leh bin file and a2l
but bin file different source

now attached more z20lel leh original file
a2l file 1. z20ler 170ps me7.6.2
2. me7.6.2

but importing not passed
try set offset but we tried


Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #5 on: January 21, 2014, 01:05:17 PM »

Where's the a2l?
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #6 on: January 21, 2014, 01:14:58 PM »

Where's the a2l?

first post
Me7.6.2_z20ler_a2l.rar
 Opel ME7.62_a2l.rar
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #7 on: January 21, 2014, 01:26:41 PM »

OK I haven't looked at the A2L but do have this - any good?

Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #8 on: January 21, 2014, 01:29:47 PM »

attached z20ler and leh bin file and a2l
but bin file different source

now attached more z20lel leh original file
a2l file 1. z20ler 170ps me7.6.2
2. me7.6.2

but importing not passed
try set offset but we tried


full ecu read bigger file
maybe a2l passed full bin file ?
but winols and ecm only 768k file correct chksum

Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #9 on: January 21, 2014, 03:04:10 PM »

Sorry, I don't understand.   Huh
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #10 on: January 21, 2014, 03:33:22 PM »

Sorry, I don't understand.   Huh

only need winols import a2l damos file correct offset point

z20leh/ler /lel same  maps
but galletto reading ecu full size not 768k
832k but not problem
edited 832k 8000-18000 remove FFFFFF and work fine
winols and ecm corrected cheksum

i dont know a2l file work 768k bin file or full 832k file
Logged
sergio27992
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #11 on: September 18, 2024, 01:24:57 PM »

only need winols import a2l damos file correct offset point

z20leh/ler /lel same  maps
but galletto reading ecu full size not 768k
832k but not problem
edited 832k 8000-18000 remove FFFFFF and work fine
winols and ecm corrected cheksum

i dont know a2l file work 768k bin file or full 832k file


could you explain me how u fix it? i have the same problem as you Sad
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)