Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
B6 1.8T aka Pandora
Pages: [
1
]
« previous
next »
Author
Topic: B6 1.8T aka Pandora (Read 6499 times)
anyAvant
Newbie
Karma: +0/-0
Offline
Posts: 6
B6 1.8T aka Pandora
« on: February 02, 2014, 03:15:51 AM »
hi,
im from cape town south africa,
i have a b6 audi 1.8t avant auto. 2003.
8e0909018a
i have an immo problem (light keeps flashing) and the def error on the dash from trying to pull a pin using a supervag - chinese version.
ive read my car using nefmoto, the following dtc appears:
p0112 decoding not licenced
status 0x61
this is the only dtc that appears
car does not run. want to possibly flash via obd. ive tried searching for the flash with no luck.
can this ecu be flashed via OBD? can the cluster be sorted from obd as well?
could somebody provide a link for the correct file and procedure?
much appreciated
thanks
Logged
ddillenger
Hero Member
Karma: +641/-21
Offline
Posts: 5640
Re: B6 1.8T aka Pandora
« Reply #1 on: February 02, 2014, 03:30:50 AM »
It'll flash via OBD if the immobilizer is matched and able to be authenticated. However the flash doesn't seem like your issue.
http://nefariousmotorsports.com/forum/index.php?topic=3069.0title=
Logged
Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!
Email/Google chat:
DDillenger84(at)gmail(dot)com
Email>PM
anyAvant
Newbie
Karma: +0/-0
Offline
Posts: 6
Re: B6 1.8T aka Pandora
« Reply #2 on: February 02, 2014, 09:41:11 AM »
thanks for the info.
ive downloaded the flash file. do i use nefmoto or arg to flash. sorry for the newb questions. it seems pretty straight forward but dont want to mess up.
any info on the def problem? what would be the easiest and cost effective solution?
Logged
anyAvant
Newbie
Karma: +0/-0
Offline
Posts: 6
Re: B6 1.8T aka Pandora
« Reply #3 on: February 02, 2014, 09:54:59 AM »
ok. i have the file.
what do i choose for memory layout?
Logged
f1torrents
Sr. Member
Karma: +17/-1
Offline
Posts: 303
Re: B6 1.8T aka Pandora
« Reply #4 on: February 02, 2014, 11:21:22 AM »
Why do you want to flash your ECU?
Do you think its corrupted and re-flashing it will fix the issue?
If so what is the issue.
You cluster is another problem altogether. Lets start with your ECU.
Logged
f1torrents
Sr. Member
Karma: +17/-1
Offline
Posts: 303
Re: B6 1.8T aka Pandora
« Reply #5 on: February 02, 2014, 11:24:31 AM »
From your previous posts I see no problem with your ECU what so ever.
Just a air intake temp DTC.
Your IMMO issues are to deal with your cluster, which you have put into DEF error.
I doubt you have any backup eeprom from your cluster.
Logged
anyAvant
Newbie
Karma: +0/-0
Offline
Posts: 6
Re: B6 1.8T aka Pandora
« Reply #6 on: February 02, 2014, 11:33:34 AM »
ok thanks for the info
i suspect the previous guy who flashed it messed up. i dont get any dtcs regarding start prevented due to immo but ive tried everything including mechanical to get her to start with no joy.
she just wont start and the immo light keeps flashing making me suspect that it has a part in the car not starting.
will the def error prevent start? should i rather sort the cluster first? i have a friend who has the tools to remove any IC and write any file to it. i think virginise the cluster is the term. could someone point me in the direction of this file?
thanks for all the help thus far. appreciated
Logged
_nameless
Hero Member
Karma: +342/-466
Online
Posts: 2802
Re: B6 1.8T aka Pandora
« Reply #7 on: February 06, 2014, 05:03:03 AM »
immo off the ecu and deal with a flashing key on your dash.......atleast the car would run
Logged
Giving your mom a tuneup
Rollerton
Newbie
Karma: +0/-0
Offline
Posts: 12
Re: B6 1.8T aka Pandora
« Reply #8 on: March 06, 2014, 04:02:33 PM »
DeF error definitely keeps the car from running. Someone/ something broke the cluster or tampered with the eeprom.
I don't know half of what a few guys on this forum know about clusters, but I'm going to predict that you do not have the tool to fix the Def error. The eeprom and eeprom mask/encyption have to be uncoprrupted and match. Your ECU very likely has nothing to do with it.
IF you had the original dump from your cluster you may be able to fix it, otherwise I think you'll have to send it to someone to work some magic (de Ja vu) or start with a new / used uncorrupted cluster.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 28, 2024, 07:36:32 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
Logged
