Pages: [1]
Author Topic: Maf underscaled?  (Read 2889 times)
robbyrr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« on: February 03, 2014, 09:21:08 AM »

I'm running 1.8 bar boost(ebc) and actual load never gets higher than 212 ish...that must mean that maf is underscaled right?
maestro software(i know)..maf in question is Audi V8 077 133 471 J..MLHFM should match(you get to pick from a dropdown menu)but with maestro you never know.


as soon as i learned enough im dumping maestro and start experimenting with winols...so many unknown factors in maestro.
« Last Edit: February 03, 2014, 11:05:30 AM by robbyrr » Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #1 on: February 03, 2014, 11:38:24 AM »

sorry delete
Smiley
Logged

VAG cars newbie tuner Smiley
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)