Help Identifying Unknown Map

Pages: [1]

« previous next »

Author

Topic: Help Identifying Unknown Map - KFSW (Read 4526 times)

tightmopedman9

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 45

	Help Identifying Unknown Map - KFSW « on: February 13, 2014, 12:22:01 AM »

KFSW - Schließwinkel Kennfeld - 16 x 16
This is from a Bosch M4.4 system.

It is under the ignition category in the DAMOS. Y axis is battery voltage, X axis is RPM.

I assumed it was a dwell map, but now I'm not too sure.


	Logged

tightmopedman9

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 45

	Re: Help Identifying Unknown Map - KFSW « Reply #1 on: February 13, 2014, 12:23:32 AM »

Forgot to add, cell values are degrees (rotational I believe)


	Logged

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	Re: Help Identifying Unknown Map - KFSW « Reply #2 on: February 13, 2014, 12:46:26 AM »

cam dwell characteristic map

this is a bad translation from a german text:
On high revs you have a lower energy at the spark plug. to compensate this the cam dwell caracteristic map is used.
this map provides the ideal dwell angle at a given voltage and rpm to achieve the ideal ignition/firing voltage.

source:
https://www.uni-muenster.de/imperia/md/content/fachbereich_physik/technik_didaktik/steuerung_ottomotor.doc


	Logged

tightmopedman9

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 45

	Re: Help Identifying Unknown Map - KFSW « Reply #3 on: February 13, 2014, 01:00:03 AM »

Awesome! Thanks, I guess I was looking for a simpler map, one that just had dwell time at a given RPM and load. However, the dwell by cam angle does make more sense.

Would I be right in thinking that increasing the cell value will increase the amount of dwell time?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 11:34:23 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search