Khendal
Full Member
Karma: +9/-8
 Offline
Posts: 226
|
 |
« Reply #330 on: October 06, 2017, 03:56:19 PM »
|
|
|
Just to let you know...i've found the problem why the car won't open the throttle... The owner has changed entire engine and sensor with a CDLx ...but ecu was still for ori car BYD ... and at the end some sensors were not linearized. I've flashed a new ecu of a CDL engine and now works everything like a charm  |
|
|
|
|
Logged
|
|
|
|
roman_auto
Jr. Member
Karma: +1/-8
Offline
Posts: 25
|
|
« Reply #331 on: January 28, 2018, 04:11:18 PM »
|
|
|
Hi guys
Quick question, i tune my a6 med9 and fitted k04 on , but i cant pass 1.2bar boost with gains 50hp my tahp and 100nm, but target is 1.7-1.8bar, beside LDPBN that limit the max boost for this ecu ??
Thanks
|
|
|
|
|
Logged
|
|
|
|
NBR
Full Member
Karma: +20/-7
Offline
Posts: 79
|
|
« Reply #332 on: January 28, 2018, 10:46:31 PM »
|
|
|
KFLDHBN is another limit. What load are you requesting in KFMIRL and LDRXN? It would be helpful if you post logs
|
|
|
|
|
Logged
|
|
|
|
|
gman86
|
|
« Reply #333 on: January 29, 2018, 01:28:02 AM »
|
|
|
KFLDHBN is another limit. What load are you requesting in KFMIRL and LDRXN? It would be helpful if you post logs
Also that level of boost will never be a target without some serious code level changes. |
|
|
|
|
Logged
|
|
|
|
roman_auto
Jr. Member
Karma: +1/-8
Offline
Posts: 25
|
|
« Reply #334 on: January 29, 2018, 01:28:47 AM »
|
|
|
Thanks mate
KFMIRL - 240 all the way in last raw, and LDRXN also matcg 240 same number as kfmirl, but in my requast boost 2250 all the way, anu idea, and yes i will post later some logs, also,
|
|
|
|
|
Logged
|
|
|
|
roman_auto
Jr. Member
Karma: +1/-8
Offline
Posts: 25
|
|
« Reply #335 on: January 29, 2018, 01:30:01 AM »
|
|
|
Thanks mate
KFMIRL - 240 all the way in last raw, and LDRXN also matcg 240 same number as kfmirl, but in my requast boost on log is 2250 all the way rpm , any idea, and yes i will post later some logs, also,
|
|
|
|
|
Logged
|
|
|
|
NBR
Full Member
Karma: +20/-7
Offline
Posts: 79
|
|
« Reply #336 on: January 29, 2018, 02:04:45 AM »
|
|
|
Also that level of boost will never be a target without some serious code level changes.
This is true, your requested will never go over 2550. But at least you should get your request up there and then drive wgdc manually if you wish to go higher |
|
|
|
|
Logged
|
|
|
|
roman_auto
Jr. Member
Karma: +1/-8
Offline
Posts: 25
|
|
« Reply #337 on: January 29, 2018, 03:44:30 AM »
|
|
|
So i understand my limit now is KFLDHBN i will change it in 8bit to 255, but i guess car will not make more then 2550mbar, so if i want to go 1.8 bar , any idea what map i need to change please ?
|
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #338 on: January 29, 2018, 07:42:01 AM »
|
|
|
So i understand my limit now is KFLDHBN i will change it in 8bit to 255, but i guess car will not make more then 2550mbar, so if i want to go 1.8 bar , any idea what map i need to change please ?
Have you even looked at the factor??? You will never request more than 2550mbar on this ECU without modifying scaling on plsol and other things. |
|
|
|
|
Logged
|
|
|
|
roman_auto
Jr. Member
Karma: +1/-8
Offline
Posts: 25
|
|
« Reply #339 on: January 29, 2018, 08:03:28 AM »
|
|
|
Have you even looked at the factor???
You will never request more than 2550mbar on this ECU without modifying scaling on plsol and other things.
Excally, so what i ask, what maps i need to mod to get my 1.8bar goal, and map are connected or need to change axis ? |
|
|
|
|
Logged
|
|
|
|
|
woj
|
|
« Reply #340 on: January 29, 2018, 08:11:24 AM »
|
|
|
He is saying that changing just the maps is not sufficient, you need to hack the code to do it right, look at the 5120 hack threads.
|
|
|
|
|
Logged
|
|
|
|
NBR
Full Member
Karma: +20/-7
Offline
Posts: 79
|
|
« Reply #341 on: January 29, 2018, 11:58:01 PM »
|
|
|
Excally, so what i ask, what maps i need to mod to get my 1.8bar goal, and map are connected or need to change axis ?
I think you need to go read the S4 Wiki again, it's explained there why you won't be able to request over 2550mbar and like the guys said, if you want closed loop boost control above 2550 then you need to do assembly code changes (5120 hack). Otherwise the S4 Wiki does talk about open loop above that limit if you want to do that |
|
|
|
|
Logged
|
|
|
|
roman_auto
Jr. Member
Karma: +1/-8
Offline
Posts: 25
|
|
« Reply #342 on: January 30, 2018, 09:23:37 AM »
|
|
|
Thanks guys for all the answer much apricieate, i looked on wiki but hard to understand fully what the areas of the maps need to mod excally for let the ecu pass 2550, again thanks all
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #343 on: January 30, 2018, 02:03:37 PM »
|
|
|
i looked on wiki but hard to understand fully what the areas of the maps need to mod
You cannot do it solely by altering the maps. |
|
|
|
|
Logged
|
|
|
|
roman_auto
Jr. Member
Karma: +1/-8
Offline
Posts: 25
|
|
« Reply #344 on: January 30, 2018, 04:02:15 PM »
|
|
|
You cannot do it solely by altering the maps.
I willing to pay for solution, for info about this, or someone to make it, or any solution that can solve the puzzle how to boost more, Thanks |
|
|
|
|
Logged
|
|
|
|
|
