Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Reverse Engineering
>
how to read an encrypted file
Pages: [
1
]
« previous
next »
Author
Topic: how to read an encrypted file (Read 7378 times)
durfAR
Newbie
Karma: +1/-0
Offline
Posts: 9
how to read an encrypted file
« on: April 25, 2011, 09:21:53 PM »
Is there a standard flow chart to read a file on the ecu if is encrypted,
such if nefmoto software doesn't not read it then try....
I would like to not have to pull the ecu out of the car. Can I get the ECU in boot mode with it in the car, and then disable the encryption. I want to modify the file that I have now since it works well.
I have UNitronics Stage 1 on my 2.7t 6 speed allroad with 551 ecu.
I want to learn to about the files and make small changes,
1. code out rear O2s
2. adjust fuel injectors to 550s or 630s
3. 85mm maf
4 adjust load maps to increase boost
I know that I am new at this but I want to make it as simple as possible, for other to follow.
any help will be appreciated
Logged
Tony@NefMoto
Administrator
Hero Member
Karma: +132/-4
Offline
Posts: 1389
2001.5 Audi S4 Stage 3
Re: how to read an encrypted file
« Reply #1 on: April 28, 2011, 11:23:24 AM »
If the tune in the ECU does not allow reading with the KWP2000 protocol that the NefMoto software uses, then you will need to read the ECU in boot mode.
The easiest way to read the ECU in boot mode is with a Galletto cable from eBay.
You don't have to remove the ECU from the car, but you will most likely have to attach a ground wire to the circuit board of the ECU to trigger boot mode.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki:
http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter:
http://twitter.com/nefmoto
Rated S
Newbie
Karma: +3/-0
Offline
Posts: 11
Re: how to read an encrypted file
« Reply #2 on: May 08, 2011, 03:23:26 PM »
As Tony said buy a galletto cable on eBay.
There's a seller in NY that's cheap, free shipping, and I got it in 3 business days in California.
You can boot mode with ECU in car but you will need to remove the cover to access the pin to ground.
Logged
socals4.com/repair - ecux/vagcom/diy
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 22, 2024, 11:19:45 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
