EuroII market and disabled check engine light

Pages: [1]

« previous next »

Author

Topic: EuroII market and disabled check engine light (Read 5511 times)

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	EuroII market and disabled check engine light « on: March 02, 2014, 01:13:08 AM »

All EUII files I've seen have the CEL disabled. Hoping someone who's more fluent with IDA has seen something relevant.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: EuroII market and disabled check engine light « Reply #1 on: March 02, 2014, 06:33:39 AM »

CWNOMIL

Codeword MIL-control not active

It seems setting this from 00--->01 disables the CEL. Still looking through the FR to see what else is involved here.

Does anyone run the 551F? I noticed in the 551F CWNOMIL=01, whereas the 551K CWNOMIL=00. That would lead me to believe (hope) that along with misfire monitoring, the 551F has no CEL.


	Logged

eliotroyano

Hero Member

Karma: +48/-8
Offline

Offline

Posts: 826

	Re: EuroII market and disabled check engine light « Reply #2 on: March 02, 2014, 11:50:08 AM »

I know is not ME7 related but my M383 Euro file 06A906018CG 0261206518 352127 is MIL light diabled too. I think that this was common in some pre-2000 Euro files.


	Logged

Rick

Hero Member

Karma: +63/-4
Offline

Offline

Posts: 704

	Re: EuroII market and disabled check engine light « Reply #3 on: March 03, 2014, 12:31:47 AM »

Yes, it's disabled.

There isn't even a light in the dash. The law means it's not required.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: EuroII market and disabled check engine light « Reply #4 on: March 03, 2014, 12:42:55 AM »

Well I've been able to revive the light before by flashing a EU3 file, or US file, so I know many times it is disabled in the flash.

I *THINK* I have the CEL sorted, but now I'm trying to figure out readiness. Despite copying PROKANOL from the US file, all readiness still shows as unsupported (instant pass in VCDS).

Trudging through the FR is proving time consuming as I don't know the acronym I'm even looking for.

This really sucks, but it appears there are no EU3 S6/S8 Manual files in existence. The ones I find have VARDEF of 05612. I need something with 10612 as a possibility.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: EuroII market and disabled check engine light « Reply #5 on: March 03, 2014, 11:30:17 AM »

CWNOMIL being changed from 01 to 00 has successfully enabled the check engine light to function. Setting PROKANOL has enabled diagnosis of the emissions components (along with ESKONF) but still no readiness. All is unsupported.


	Logged

NOTORIOUS VR

Administrator
Hero Member

Karma: +58/-7
Offline

Offline

Posts: 1056

	Re: EuroII market and disabled check engine light « Reply #6 on: March 03, 2014, 11:53:13 AM »

Quote from: ddillenger on March 03, 2014, 12:42:55 AM

This really sucks, but it appears there are no EU3 S6/S8 Manual files in existence.

Strangely enough Euro 3 is from 2000 on, and the D2 S8 did in fact come with a 6 speed from the factory and I'm pretty sure it's Euro 3 compliant.


	Logged

SCHNELL ENGINEERING BLOG · STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: EuroII market and disabled check engine light « Reply #7 on: March 03, 2014, 01:17:22 PM »

I have lots of EU3 ME7.1.1 files, just no ME7.1

The last things I need to deal with here are:

1: Misfire detection
2: Readiness monitors

Other than that, everything is great.


	Logged

thegtiman

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 27

	Re: EuroII market and disabled check engine light « Reply #8 on: March 06, 2014, 04:38:27 AM »

Quote from: ddillenger on March 03, 2014, 01:17:22 PM

I have lots of EU3 ME7.1.1 files, just no ME7.1

The last things I need to deal with here are:

1: Misfire detection
2: Readiness monitors

Other than that, everything is great.

In the EU, the MIL was mandatory with the introduction of EOBD in 2001. EOBD monitoring shared a lot in common with US OBD2 standards such as monitoring cat efficiency or any other control parameters that cause untoward taipipe emissions delta on the NEDC cycle.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 10:54:20 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search