Pages: [1]
Author Topic: Won't Connect with rosstech cable  (Read 1483 times)
southernduckie
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: March 10, 2014, 04:31:58 AM »

Hi I am trying to connect i have tried all the settings and either it wont recognise the cable or it comes back with these readouts not sure what is wrong it looks like it connects then drops out? it won't let me read anything?


Validated FTDI device is in dumb mode.
Disconnected
Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
Switching to KWP1281 session.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Connecting to address 0x01.
Slow init succeeded.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Connecting to address 0x11.
Slow init failed.
Disconnected
Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Connecting to address 0x01.
Slow init succeeded.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Connecting to address 0x11.
Slow init failed.
Disconnected
Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Connecting to address 0x01.
Slow init succeeded.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Connecting to address 0x11.
Slow init failed.
Disconnected

Thanks for looking
Cheers Andrew
Logged
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 143


« Reply #1 on: March 10, 2014, 04:58:55 AM »

What are you trying to do? Read or write?

The older me5.9.2 cars can't be read via obd, just flashed.
Logged
amerol0601
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« Reply #2 on: June 01, 2014, 07:14:05 AM »

By settings you mean "Dumb Mode"?

Also, if what above is not applicable, you may also have to use downgraded drivers for your VCDS cable. At least thats what I had to do.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)