Pages: [1]
Author Topic: EDC17 DPF carbos mass calculation  (Read 3684 times)
kuebk
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 47



« on: March 14, 2014, 12:59:35 PM »

Hello,

I have odd readings of Carbon Mass Measured (in VCDS 108.3), most of time it shows 0g. Sometimes it starts to raise to let say 0,6g - but when I turn the enigne off and then on it reads it as 0g.

Looks like ECU forgetting what it has measured just a seconds above.
Anyone knows how does EDC17 reads/calculates this data? I don't like this readings.

Thanks.
Logged

VAG immo solutions (clone, immo off, repair) MEDC17, SIMOS, SDI, BCM2, ELV, DQ/DL/VL gearboxes, INVCON, MED9.x crypto
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.01 seconds with 16 queries. (Pretty URLs adds 0s, 0q)