What the crap is this from?

changed it out, much better quality pic straight from ECUx!

Nyet, It's not running rough at all.

I was having some issues with the MAF but I think I sorted most of it by basically copying the KFKHFM from the file that uses the MAF I am using for the same motor/same MAF sensor part number but larger housing. I have AWP 1.8t and I am using the BEA 1.8t MAF so I have copyed MLHFM over also initially. Also have converted to the k04-023 turbo and Samco TIP. The KFKHFM map basically went back to all 1s in say 90% of the map and very close to 1 in the last 10%ish for stock settings. My logic here is to get the MAF set up stock for what the MAF comes out of which is the TT225qBEA1.8t so i can get the EV14550cc injectors dialed in which my trims (032) are sitting @ -3.9 and 4.7 so I have some further tweeking but I am chasing a possible boost leak and was actually wondering if the funny business above 5000 rpm is from the DV leaking into the TIP.

here is the whole log.