Pages: [1]
Author Topic: Connecting to MKV 2.5L  (Read 6885 times)
zer0hz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: March 30, 2014, 01:12:10 PM »

Hey guys, I really (REALLY) didn't want to have to make a thread for this, but I'm having issues.

I'm trying to get a dump of the ECU on my 2009 VW Rabbit (2.5L 5-Cyl, N/A, CBUA Engine Code, ME7.1.1 ECU?)

I can't find any specific instructions.

I've tried NefMoto with Windows 8.1, Ross-Tech genuine HEX-CAN, Ross-Tech Drivers, 2DXX or whatever drivers, etc.
Finally I gave up and assumed that windows 8.1 was what was causing the issues (plus I had an ignition issue and playing with the drivers broke my VCDS installation), so I reimaged with Win 7.  I can not get ANY other program to recognize the ECU other than VCDS... (V-Tune, Nefmoto, Lemmiwinks, ME7 Flasher Tools, etc.)

I'm not even having issues with reading the Hex (I wish I was, that'd mean I could flash read/write!)

Someone please tell me I'm missing something stupid.  Right now, Running Win7 SP1 Ultimate x64.  Uninstalled Everything but VCDS and Ross-Tech Drivers (because I need to be able to diagnose this stupid ignition issue)

I just want to dump the ECU so I can go through and take off the speed limiter and possibly play with timing/injection maps...  Any help would be greatly appreciated.  I'm an IT contractor by day, programmer by night, car dude by whatever time I have left, so I don't feel as though the actual process should be this bewildering to me.   

Here's my VCDS Scan of the 01 module:
Saturday,29,March,2014,19:16:41:45857
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.2.0 (x64)
Data version: 20140212


Mileage:    Repair Order: 2009 Rabbit



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


                Address 01: Engine       Labels: 07K-906-055-CBT.clb
Control Module Part Number: 07K 906 055 N    HW: 07K 906 055 M
  Component and/or Version: 2,5l R5/4V      G   9970
           Software Coding: 0000071
            Work Shop Code: WSC 02134 444 12223
                      VCID: 3979242170EAB3D69C9-806C
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: March 30, 2014, 01:30:28 PM »

Nefmoto is not going to work with this ecu I'm afraid.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
zer0hz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #2 on: March 30, 2014, 01:40:38 PM »

Is there a program that will communicate with this ecu? Or am I stuck having to get a unitronics flasher/C2NER flasher to do any sort of tunes?

Also, from that can you tell me what model ecu it is (I thought it was a Bosch Motronic ME7.1.1)
What "box" it is? (I see a M and an N at the end of the numbers)

It's disappointing that I won't be able to do a dump of the ecu to take off the speed limiter... Such is life I suppose...
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #3 on: March 30, 2014, 02:44:55 PM »

It is an ME7.1.1, but it's a CAN-bus ME7.1.1 with an ST processor. You can read it with MPPS.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
zer0hz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #4 on: March 30, 2014, 03:30:29 PM »

Can I use my HEX-CAN cable with MPPS?  I know this is the Nefmoto forum, but I think you might be able to tell me the answer faster than researching it.  Thanks for the pointer!
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #5 on: April 01, 2014, 02:47:54 AM »

MPPS software with MPPS cable , I don`t think any other Hex -Can cable can work with MPPS software Smiley
Logged

VAG cars newbie tuner Smiley
engine_nerd
Newbie
*

Karma: +3/-1
Offline Offline

Posts: 19


« Reply #6 on: May 04, 2014, 11:28:16 AM »

An '09 2.5L is not ME7.1.1 it's ME17... Your car has no MAF, right? Should just have a blank MAF housing without an element taking up the place where it used to go on the earlier cars.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)