Pages: [1]
Author Topic: what is affecting wdks?  (Read 4841 times)
technic
Full Member
***

Karma: +18/-5
Offline Offline

Posts: 227


« on: March 31, 2014, 06:31:49 AM »

Hi,

I have an strange situation with my Audi TT 225. At 3000 rpm I completely loose boost and then at 5000 rpm it suddenly comes back. I can see that wdks (and also rlsol_w and wdkba) lowers drastically at this point. No DTC's, no ignition retard and no misfires.

Totally repeatable scenario, It happens every time i floor it on fourth gear.

Any ideas?

I have changed KFMIRL to 200 at max %torque request for test and LDRXN is also well above this value. Torque monitoring is switched off.

Attaced is a me7logger log, both csv and an xls variant. Look at the time 6.25s that is where everything turn off, almost like soft limp  Huh.


Logged
bk56190
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 91


« Reply #1 on: March 31, 2014, 07:05:24 AM »

Hello,

I think KFMDBGRG is the problem.
Logged
technic
Full Member
***

Karma: +18/-5
Offline Offline

Posts: 227


« Reply #2 on: March 31, 2014, 07:20:14 AM »

I think you might be right. I completely forgot about the gearbased limiters Smiley Thanks, will try
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #3 on: April 01, 2014, 02:40:07 PM »

I think you might be right. I completely forgot about the gearbased limiters Smiley Thanks, will try
throttle cut due to over boost..

Actual is more than desired..
Logged
technic
Full Member
***

Karma: +18/-5
Offline Offline

Posts: 227


« Reply #4 on: April 01, 2014, 02:45:58 PM »

I temporarily allowed for quite high boost deviation during testing, so in this case the problem was indeed KFMDBGRG.
Logged
bk56190
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 91


« Reply #5 on: April 01, 2014, 11:53:45 PM »

 Good Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.081 seconds with 16 queries. (Pretty URLs adds 0.013s, 0q)