Tuning KLAF for big turbo setups

Pages: [1]

« previous next »

Author

Topic: Tuning KLAF for big turbo setups (Read 4439 times)

catbed

Sr. Member

Karma: +8/-2
Offline

Offline

Posts: 300

	Tuning KLAF for big turbo setups « on: April 09, 2014, 06:14:17 PM »

Does KLAF need to be changed for big turbo 1.8t setups? I think so considering output is much different from k03s, but have not found much info searching except for a few mentions of it. No concrete info really.

I'd like to understand before I go about changing things unnecessarily.


	Logged

panos1975

Full Member

Karma: +7/-6
Offline

Offline

Posts: 105

	Re: Tuning KLAF for big turbo setups « Reply #1 on: April 10, 2014, 05:46:31 AM »

With my poor knowleadge i think KLAF is an Alpha-n map so you have to tune when you go mafless.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Tuning KLAF for big turbo setups « Reply #2 on: April 10, 2014, 02:44:36 PM »

Quote from: panos1975 on April 10, 2014, 05:46:31 AM

With my poor knowleadge i think KLAF is an Alpha-n map so you have to tune when you go mafless.

There are side benefits to getting KLAF right, even if you are running a MAF... for example, if your MAF goes tits up while you are driving around


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

catbed

Sr. Member

Karma: +8/-2
Offline

Offline

Posts: 300

	Re: Tuning KLAF for big turbo setups « Reply #3 on: April 10, 2014, 08:59:20 PM »

Quote from: nyet on April 10, 2014, 02:44:36 PM

There are side benefits to getting KLAF right, even if you are running a MAF... for example, if your MAF goes tits up while you are driving around

I understand KLAF is a big part of MAFless, but isn't it also used for target throttle calculation? I'm not at my computer so I can't post part of the FR where it goes over this.

EDIT: It seems I was thinking about calculated mass flow at throttle plate. So am I right in assuming KLAF is specific to throttle bodies?


« Last Edit: April 11, 2014, 01:52:18 PM by catbed »	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Tuning KLAF for big turbo setups « Reply #4 on: March 08, 2015, 10:58:21 PM »

Anyone else have any input on KLAF?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 10:44:45 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search