Hey, maybe someone could riddle me this.

Once I removed the SAI system I got to thinking and when comparing the L-box to a M-box file I see that there is some warmup maps that are different. Is this cause there is not a SAI system on the 6MT? or is this a calibration thing that ddlinger has stated to me b4. Would it make sense to copy over the different warm up maps to a L-Box file if the SAI has been removed?

Also when using NVR file posted. I at 1st ran the 2++ posted for the correct car and maf type. I did however leave the stock timing maps.

When adding in timing map from the NVR 2++ or if its the schnell file which ever one. I notice when getting the car nice and hot by racing around the car gets stinky like sulfur. Whats the cause, too rich from knock and its dumping fuel, or the cats are clogged?

I did get stinky exhaust, but after downpipe install the smell went away. So it must have been I'm guessing extra fuel dumped during startup or building up in cats.

Doubtful, though the rich condition may cause the cat to take longer to reach light-off temps.

Smoking is bad, and you shouldn't be burning your pets..

Might be your combi valves opening.